PI3B3245LEX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 10Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PI3B3245 |
| Operating Supply Voltage | 3.3V |
| Circuit | 8 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 4.5 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PI3B3245LEX Overview
It is included in the 20-TSSOP (0.173, 4.40mm Width) in order to save board space.It is packaged in the way of Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.As the analog part, the circuit uses an analog IC Bus Switch.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.When digital controlled switch operates at 3V~3.6V, designers have superior flexibility.As parts of its basic configuration, 20 terminations are desgined.The base part number is PI3B3245, so you can find its logic switch related parts using that number.For multiplexer's system, 3.3V voltage is supplied.At the end of a conductor, it uses GULL WING as the point where the conductor ends.The supply type of this multiplexer ic is Single.Currently, it is configured with a 20 pin configuration.It is positioned in the direction of Surface Mount.In the CBTLV/3B family, the logic switch is included.There are 8 bits signal multiplexer provides.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 2.97V.The maximal supply voltage (Vsup) should be kept at 3.63V to avoid some unnecessary failures.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.In the absence of external influences, it consumes 3μA current of multiplexer ic.Reliable performance of the multiplexers can be achieved when a supply voltage of 3.3V is provided.2 is the resistance at which it operates.It operates with a resistance of 10Ohm.
PI3B3245LEX Features
Supplied in the 20-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
PI3B3245LEX Applications
There are a lot of Diodes Incorporated PI3B3245LEX Signal Switches / Multiplexers / Decoders applications.
- Enabling block of memory depending on address in memory chips
- A/D converters
- Automatic Monitoring systems
- Recording transmission
- Telephone network
- Make half adder
- Analog to digital conversion
- CPU memory location identification
- Small scale TV wall
- Automatic health monitoring systems
