banner_page

PI3B3245QEX

20 Terminations3V~3.6V 20 Pin 3245 Signal switch1 Functions


  • Manufacturer: Diodes Incorporated
  • Nocochips NO: 233-PI3B3245QEX
  • Package: 20-SSOP (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 162
  • Description: 20 Terminations3V~3.6V 20 Pin 3245 Signal switch1 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SSOP (0.154, 3.90mm Width)
Number of Pins 20
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Published 2017
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Type Bus Switch
Resistance 10Ohm
Subcategory Bus Driver/Transceivers
Technology CMOS
Voltage - Supply 3V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.635mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number 3245
Operating Supply Voltage 3.3V
Circuit 8 x 1:1
Supply Voltage-Max (Vsup) 3.63V
Supply Voltage-Min (Vsup) 2.97V
Number of Ports 2
Number of Bits 8
Propagation Delay 250 ps
Quiescent Current 3μA
Family CBTLV/3B
Output Characteristics 3-STATE
Supply Type Single
Output Polarity TRUE
High Level Output Current -120mA
Low Level Output Current 120mA
Voltage Supply Source Single Supply
Independent Circuits 1
Width 3.9mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

PI3B3245QEX Overview


This is a relatively small item of digital switch that is included in the 20-SSOP (0.154, 3.90mm Width) in order to save space on the board.It is packaged in the way of Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.For the analog part of the multiplexers, an IC Bus Switch is used.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Designers have greater flexibility when digital controlled switch operates at a 3V~3.6V supply voltage.Among its basic configurations are 20 terminations.To find signal switch's related components, a base part number of 3245 may also be used.The multiplexer's system is powered by 3.3V volts.As the end of conductors, it uses GULL WING.In this case, Single is employed as the supply type.This multiplexer ic is configured with 20 pins.It is mounted in the way of Surface Mount.There is a family of CBTLV/3B members.As a result, signal multiplexer provides 8 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 2.97V so that unnecessary failures can be prevented.It is advisable to keep the maximum supply voltage (Vsup) at 3.63V so as to avoid some unnecessary failures.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.There are no external influences on this multiplexer ic, so it consumes 3μA current.Supply voltages of 3.3V can provide reliable performance of the multiplexers.2 is the resistance at which it operates.The system operates with a resistance of 10Ohm.

PI3B3245QEX Features


Supplied in the 20-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V

PI3B3245QEX Applications


There are a lot of Diodes Incorporated PI3B3245QEX Signal Switches / Multiplexers / Decoders applications.

  • Communication system
  • Frequency multiplexing system
  • Data collection system
  • Analog to digital conversion
  • Make half adder
  • Enabling different rows of memory depending on address in memory chips
  • High-performance memory-decoding applications
  • Speed synchronization of multiple motors in industries
  • Transmission from the computer system of a satellite
  • Time division multiplexing system

Write a review

Note: HTML is not translated!
    Bad           Good