PI3B3251LEX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer/Demultiplexer |
| Terminal Finish | MATTE TIN (787) |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Circuit | 1 x 8:1 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Family | CBTLV/3B |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Propagation Delay (tpd) | 0.25 ns |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
PI3B3251LEX Overview
It is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save board space.It is packaged according to the Tape & Reel (TR) method.For mounting, digital switch ic uses the method Surface Mount.The analog IC used in the multiplexers can be referred to as Multiplexer/Demultiplexer.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When operated with a 3V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Among its basic configurations are 16 terminations.In multiplexer's system, 3.3V is the voltage supplied.At the end of a conductor, it uses GULL WING as the point where the conductor ends.I would like to refer to the logic switch as a member of the CBTLV/3B family.As a result, signal multiplexer provides a total of 8 bits.Keeping the minimum supply voltage (Vsup) at 2.97V prevents some unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 3.63V so as to avoid some unnecessary failures.In electronic terms, the digital switch ic is classified as part number Other Logic ICs.Reliable performance of the multiplexers can be achieved when a supply voltage of 3.3V is provided.The signal switching operates with a resistance of 2.
PI3B3251LEX Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Operating with the supply voltage of 3.3V
PI3B3251LEX Applications
There are a lot of Diodes Incorporated PI3B3251LEX Signal Switches / Multiplexers / Decoders applications.
- Automation system
- To select different task for memory in microprocessor memory systems
- Speed synchronization of multiple motors in industries
- To select different devices in microprocessor input
- Make full adder
- Enabling different functions units in microprocessor instruction decoding
- VGA
- Encrypted communications system
- High-performance memory systems
- Data-routing applications
