PI3B3251QE
| Parameters | |
|---|---|
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer/Demultiplexer |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 3251 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Circuit | 1 x 8:1 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Throw Configuration | DPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 5.5 ns |
| Family | CBTLV/3B |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2009 |
PI3B3251QE Overview
Due to the lack of space on the board, digital switch is provided in the 16-SSOP (0.154, 3.90mm Width).The package is in the form of Tube.digital switch ic uses the method of Surface Mount for mounting.the multiplexers uses IC Multiplexer/Demultiplexer as the analog IC.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.When digital controlled switch operates at 3V~3.6V, designers are provided with a greater degree of flexibility.As parts of its basic configuration, 16 terminations are desgined.The base part number is 3251, which is also useful when looking up signal switch's related components.The multiplexer is supplied with 3.3V voltage.At the end of a conductor, it uses GULL WING as the point where the conductor ends.The supply type of this multiplexer ic is Single.With 16 pins, it is configured.The multiplexer ic is mounted in the direction of Surface Mount.Among the family of CBTLV/3B the logic switch is a member.Signal multiplexer contains 8 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2.97V.Avoid unnecessary failures by keeping Vsup at 3.63V.The part belongs to the Other Logic ICs category of signal switches.Without the influence of external factors, it consumes 3μA current of multiplexer ic.Supply voltages of 3.3V can provide reliable performance of the multiplexers.The resistance is 2.In the mux switch configuration, there are 1 elements.
PI3B3251QE Features
Supplied in the 16-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
PI3B3251QE Applications
There are a lot of Diodes Incorporated PI3B3251QE Signal Switches / Multiplexers / Decoders applications.
- HDMI applications
- A robotic vehicle with the metal detector
- Electronically controlled engine system
- Implementing boolean functions with multiple variables
- Arithmetic Logic Units
- Decimal decoder
- Analog, digital or video signal switching
- A/D converters
- Encrypted communications system
- Data-routing applications
