PI3B3251QEX
| Parameters | |
|---|---|
| Circuit | 1 x 8:1 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Ports | 2 |
| Power Dissipation | 500mW |
| Number of Bits | 8 |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 5.5 ns |
| Family | CBTLV/3B |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 10Ohm |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PI3B3251 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 3.3V |
PI3B3251QEX Overview
In order to save board space, digital switch is located in the 16-SSOP (0.154, 3.90mm Width).It is packaged according to the Tape & Reel (TR) method.In terms of mounting, digital switch ic uses the Surface Mount method .Multiplexer/Demultiplexer is the analog IC that the multiplexers uses.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Using a 3V~3.6V supply voltage provides digital controlled switch's superior flexibility for designers.The basic configuration includes 16 terminations.You can also find related parts by using its logic switch base part number of PI3B3251.In this case, 3.3V is the voltage supplied to the multiplexer's system.Conductors terminate at GULL WING in this design.In this case, the supply type is Single.This multiplexer ic has 16 pins configured.It is mounted in the way of Surface Mount.The logic switch belongs to the family of CBTLV/3B.Signal multiplexer consists of 8 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 2.97V to avoid some unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 3.63V in order to prevent some unnecessary failures.The turn signal switch contains 1 outputs designed to operate.This is an the digital switch ic that is classified as Other Logic ICs.Not being affected by the external factors, consumes 3μA current of multiplexer ic.Reliable performance of the multiplexers can be achieved when a supply voltage of 3.3V is provided.It has 8 inputs.2 is the resistance at which it operates.This signal switching operates at a resistance of 10Ohm.
PI3B3251QEX Features
Supplied in the 16-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
PI3B3251QEX Applications
There are a lot of Diodes Incorporated PI3B3251QEX Signal Switches / Multiplexers / Decoders applications.
- Relay
- Time division multiplexing system
- GLAN
- Make half adder
- Steel plants
- Automatic health monitoring systems
- Automation system
- Data bus control
- Microprocessor input/output systems
- Computer memory
