PI3B3257AQE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2016 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer/Demultiplexer |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 3257 |
| Operating Supply Voltage | 3.3V |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Bits | 8 |
| Throw Configuration | DPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 4.8 ns |
| Family | CBTLV/3B |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 4 |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PI3B3257AQE Overview
Providing this information in the 16-SSOP (0.154, 3.90mm Width) enables digital switch board space to be saved.As a result, it is packaged in a way that is referred to as Tube.The method digital switch ic adopts for mounting is Surface Mount.The analog IC used in the multiplexers can be referred to as Multiplexer/Demultiplexer.The operating temperature of -40°C~85°C will not be susceptible to external factors.A supply voltage of 3V~3.6V provides digital controlled switch's superior flexibility for designers.There is a design for terminating 16 as part of its basic configuration.The base part number is 3257, so you can find its logic switch related parts using that number.The multiplexer's system is powered by 3.3V volts.GULL WING is used as the point at which the conductors come to an end as part of this formula.The supply type of this multiplexer ic is Single.With 16 pins, it is configured.It is mounted in the way of Surface Mount.The logic switch is a member of the CBTLV/3B family.In the signal multiplexer, there are 8 bits available.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 2.97V.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 3.63V.The digital switch ic is an electronic part classified into Other Logic ICs.It consumes 3μA current of multiplexer ic without external influences.When a supply voltage of 3.3V is used, reliable performance of the multiplexers can be achieved.Signal sources consist of output lines of 4.
PI3B3257AQE Features
Supplied in the 16-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
4 output lines
PI3B3257AQE Applications
There are a lot of Diodes Incorporated PI3B3257AQE Signal Switches / Multiplexers / Decoders applications.
- Enabling block of memory depending on address in memory chips
- LVDS
- Automation system
- Signal router
- Steel plants
- Computer memory
- Data demultiplexing
- Automatic Monitoring systems
- To select different devices in microprocessor input
- GLAN
