PI3B3257LEX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer/Demultiplexer |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | PI3B3257 |
| Operating Supply Voltage | 3.3V |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Ports | 3 |
| Number of Bits | 4 |
| Propagation Delay | 250 ps |
| Family | CBTLV/3B |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Number of Input Lines | 8 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 4 |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PI3B3257LEX Overview
This is a relatively small item of digital switch that is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save space on the board.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).Surface Mount is the mounting method digital switch ic uses.In the multiplexers, the analog IC Multiplexer/Demultiplexer is used.By keeping the operating temperature at -40°C~125°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 3V~3.6V, designers are provided with a greater degree of flexibility.As parts of its basic configuration, 16 terminations are desgined.You can also find related parts by using its logic switch base part number of PI3B3257.The multiplexer's system is powered by 3.3V voltage.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.The supply type of this multiplexer ic is Single.There are 16 pins on it.Surface Mount is the way it is mounted.The CBTLV/3B family includes the logic switch.There are 4 bits signal multiplexer provides.The minimal supply voltage (Vsup) should be kept at 2.97V to avoid some unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 3.63V so as to avoid some unnecessary failures.Other Logic ICs is the classification for this the digital switch ic.If the supply voltage is 3.3V, reliable performance of the multiplexers can be achieved.As far as the resistance is concerned, it operates with 3.On the multiplexers, 8 input lines are provided for accepting voltage levels.There are 4 output lines designed to serve as the source of the signal.
PI3B3257LEX Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
8 input lines
4 output lines
PI3B3257LEX Applications
There are a lot of Diodes Incorporated PI3B3257LEX Signal Switches / Multiplexers / Decoders applications.
- Automatic Monitoring systems
- Memory chips
- Implementing boolean functions with multiple variables
- Paper plants
- Enabling different rows of memory depending on address in memory chips
- Logic gates for other digital devices
- Enabling block of memory depending on address in memory chips
- High-performance memory-decoding applications
- War field flying robot with a night vision flying camera
- Electronic circuits
