PI3B32X245BE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 40-FSOP (0.154, 3.90mm Width) |
| Number of Pins | 40 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 10Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 32X245 |
| Operating Supply Voltage | 3.3V |
| Circuit | 8 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Number of Ports | 2 |
| Power Dissipation | 500mW |
| Number of Bits | 16 |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 4.5 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PI3B32X245BE Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 40-FSOP (0.154, 3.90mm Width).The package is in the form of Tube.Surface Mount is the mounting method digital switch ic uses.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 3V~3.6V.provides digital controlled switch's digital controlled switch'sThe basic configuration of this system includes 40 terminations.The base part number is 32X245, which is also useful when looking up signal switch's related components.For multiplexer's system, 3.3V voltage is supplied.It is the end of conductors that is represented by GULL WING.Single is employed as its supply type.With 40 pins, it is configured.The mounting point is Surface Mount.The logic switch belongs to the family of CBTLV/3B.In this signal multiplexer, there are 16 bits that are provided.Avoid unnecessary failures by keeping Vsup at 3.63V.This is a signal switch that is categorized as Bus Driver/Transceivers.Without the influence of external factors, it consumes 3μA current of multiplexer ic.When a supply voltage of 3.3V is used, reliable performance of the multiplexers can be achieved.The system operates with a resistance of 2.As far as the resistance is concerned, it operates with 10Ohm.
PI3B32X245BE Features
Supplied in the 40-FSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
PI3B32X245BE Applications
There are a lot of Diodes Incorporated PI3B32X245BE Signal Switches / Multiplexers / Decoders applications.
- A robotic vehicle with the metal detector
- To select different devices in microprocessor input
- Robotic vehicles
- Computer memory
- Medical industry
- Recording transmission
- Microprocessor input/output systems
- Implementing boolean functions with multiple variables
- Data communication
- Automation system
