PI3B3861QE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 10Ohm |
| Terminal Finish | MATTE TIN |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Operating Supply Voltage | 3.3V |
| Circuit | 10 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Ports | 2 |
| Number of Bits | 10 |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 4.5 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PI3B3861QE Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 24-SSOP (0.154, 3.90mm Width).The package is packaged in accordance with Tube.The mounting method digital switch ic uses is Surface Mount.Bus Switch is the analog IC that the multiplexers uses.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.The turn signal switch is designed for use with a 3V~3.6V supply voltage, which gives it a lot of flexibility.The basic configuration of this system includes 24 terminations.In this case, 3.3V is the voltage supplied to the multiplexer's system.As a result, conductors end at GULL WING.A total of 24 pins are configured on this board.As you can see, it is mounted in the direction of Surface Mount.In the CBTLV/3B family, the logic switch is included.There are 10 bits in signal multiplexer.To avoid unnecessary failures, keep the supply voltage at 2.97V (Vsup).The maximal supply voltage (Vsup) should be kept at 3.63V to avoid some unnecessary failures.Bus Driver/Transceivers is the classification for this the digital switch ic.In the absence of external influences, it consumes 3μA current of multiplexer ic.Reliable performance of the multiplexers can be achieved when a supply voltage of 3.3V is provided.The signal switching operates with a resistance of 2.With a resistance of 10Ohm, it operates.
PI3B3861QE Features
Supplied in the 24-SSOP (0.154, 3.90mm Width) package
Operating with the supply voltage of 3.3V
PI3B3861QE Applications
There are a lot of Diodes Incorporated PI3B3861QE Signal Switches / Multiplexers / Decoders applications.
- Data collection system
- Small scale TV wall
- Idle motor
- Analog, digital or video signal switching
- High-performance memory systems
- Combinational circuit
- Implementing boolean functions with multiple variables
- Computer memory
- HDMI applications
- Robotic vehicles
