PI3C3125LE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 8Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Bus Driver/Transceivers |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 3125 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 4 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Ports | 2 |
| Nominal Supply Current | 260μA |
| Power Dissipation | 500mW |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Propagation Delay | 9.8 ns |
| Quiescent Current | 500μA |
| Turn On Delay Time | 9.8 ns |
| Family | CB3Q/3VH/3C/2B |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 400MHz |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PI3C3125LE Overview
As a means of saving space, digital switch is provided in the 14-TSSOP (0.173, 4.40mm Width).It is packaged in the way of Tube.The mounting method digital switch ic uses is Surface Mount.For the analog part of the multiplexers, an IC Bus Switch is used.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.Design engineers have more flexibility when digital controlled switch operates at 2.3V~3.6V voltage.Its basic configuration includes terminations in the 14 range.The base part number is 3125, which is also useful when looking up signal switch's related components.The multiplexer's system is powered by 3.3V volts.A conductor terminates at GULL WING.In this case, the supply type is Single.This multiplexer ic has 14 pins configured.The mounting is in the way of Surface Mount.The logic switch object belongs to the family of CB3Q/3VH/3C/2B.In this signal multiplexer, there are 1 bits that are provided.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2.97V.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 3.63V.Bus Driver/Transceivers is the classification for this the digital switch ic.It consumes 500μA current of multiplexer ic without external influences.Reliable performance of the multiplexers can be achieved when a supply voltage of 3.3V is provided.This signal switching operates at a resistance of 2.As far as the resistance is concerned, it operates with 8Ohm.This mux switch configuration has 4 elements.
PI3C3125LE Features
Supplied in the 14-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
PI3C3125LE Applications
There are a lot of Diodes Incorporated PI3C3125LE Signal Switches / Multiplexers / Decoders applications.
- Arithmetic Logic Units
- Night vision cameras
- Relay
- Time division multiplexing system
- Paper plants
- Control unit of Central Processing unit (CPU)
- Communication system
- Data bus control
- Idle motor
- To select different devices in microprocessor input
