PI3C3125WE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 8Ohm |
| Terminal Finish | MATTE TIN (787) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 3125 |
| Number of Elements | 4 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Power Supplies | 2.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Ports | 2 |
| Power Dissipation | 500mW |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 500μA |
| Turn On Delay Time | 9.8 ns |
| Family | CB3Q/3VH/3C/2B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.885mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PI3C3125WE Overview
Due to the fact that it is provided in the 14-SOIC (0.154, 3.90mm Width), digital switch allows the board to be compacted.Tube represents its packaging.Mounting is performed using Surface Mount.In the multiplexers, the analog IC Bus Switch is used.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Design engineers have more flexibility when digital controlled switch operates at 2.3V~3.6V voltage.The basic configuration includes 14 terminations.The base part number is 3125, so you can find its logic switch related parts using that number.The multiplexer's system is supplied with a voltage of 3.3V.It employs GULL WING as the point at which conductors come to an end.Its supply type is Single, which is used as the source of power.A configuration of 14 pins is used.The mounting point is Surface Mount.The logic switch object belongs to the family of CB3Q/3VH/3C/2B.Signal multiplexer consists of 1 bits.The minimal supply voltage (Vsup) should be kept at 2.97V to avoid some unnecessary failures.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.63V.For mux switch's normal operation, there is a power supply provided at 2.5/3.3V.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.In the absence of external influences, it consumes 500μA current of multiplexer ic.This signal switching operates at a resistance of 2.The resistance of the signal switching is 8Ohm.The mux switch configuration contains 4 elements.
PI3C3125WE Features
Supplied in the 14-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
PI3C3125WE Applications
There are a lot of Diodes Incorporated PI3C3125WE Signal Switches / Multiplexers / Decoders applications.
- Signal router
- Paper plants
- Data distribution
- Image transmission
- Combinational circuit
- Audio transmission
- GLAN
- PCIe
- Data demultiplexing
- To select different devices in microprocessor output
