PI3C3125WEX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 8Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 3125 |
| Qualification Status | Not Qualified |
| Number of Elements | 4 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Power Supplies | 2.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 500μA |
| Turn On Delay Time | 9.8 ns |
| Family | CB3Q/3VH/3C/2B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.885mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PI3C3125WEX Overview
Digital switch is provided in the 14-SOIC (0.154, 3.90mm Width) for the purpose of saving board space.As a result, it is packaged in the way of Tape & Reel (TR).Surface Mount is the mounting method digital switch ic uses.the multiplexers uses an analog IC Bus Switch.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility using digital controlled switch when it works with 2.3V~3.6V voltage.There are 14 terminations included in its basic configuration.You can also find related parts by using its logic switch base part number of 3125.The voltage supplied for multiplexer's system is 3.3V.multiplexer's systemAt the end of a conductor, it uses GULL WING as the point where the conductor ends.The supply type of this multiplexer ic is Single.The board has 14 pins configured.Multiplexer ics are mounted in the direction of Surface Mount.There is a family of CB3Q/3VH/3C/2B members.As a result, signal multiplexer provides 1 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2.97V.It is advisable to keep the maximum supply voltage (Vsup) at 3.63V in order to prevent some unnecessary failures.For mux switch's normal operation, there is a power supply provided at 2.5/3.3V.This is an the digital switch ic that is classified as Bus Driver/Transceivers.Without the influence of external factors, it consumes 500μA current of multiplexer ic.The signal switching operates with a resistance of 2.A resistance of 8Ohm is used to operate it.This mux switch configuration has 4 elements.
PI3C3125WEX Features
Supplied in the 14-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
PI3C3125WEX Applications
There are a lot of Diodes Incorporated PI3C3125WEX Signal Switches / Multiplexers / Decoders applications.
- Home automation system
- Encrypted communications system
- PCIe
- Microprocessor instruction decoding
- Video transmission
- Medium scale TV wall
- Implementing boolean functions with multiple variables
- Make full adder
- Data collection system
- Data demultiplexing
