PI3C3126QE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Packaging | Tube |
| Published | 2016 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 8Ohm |
| Terminal Finish | MATTE TIN (787) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 3126 |
| Qualification Status | Not Qualified |
| Number of Elements | 4 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Power Supplies | 2.5/3.3V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Ports | 2 |
| Power Dissipation | 500mW |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 500μA |
| Turn On Delay Time | 9.8 ns |
| Family | CB3Q/3VH/3C/2B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 1.75mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PI3C3126QE Overview
For the purpose of saving board space, digital switch is included in the 16-SSOP (0.154, 3.90mm Width).Tube is the method used for packaging.Digital switch ic uses a Surface Mount mounting method.The analog IC in the multiplexers is identified as Bus Switch.When digital controlled switch operates at 2.3V~3.6V, designers have superior flexibility.There is a design for terminating 16 as part of its basic configuration.There is a base part number 3126 that can be used to locate signal switch's related components as well.The multiplexer is supplied with 3.3V voltage.As the end of conductors, it uses GULL WING.As a type of supply, Single is employed.The board has 16 pins configured.The mounting is in the way of Surface Mount.The logic switch is a member of the family of CB3Q/3VH/3C/2B.As a result, signal multiplexer provides 1 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 2.97V to avoid some unnecessary failures.Vsup (maximum supply voltage) should be kept as 3.63V to prevent unnecessary failures.For mux switch's normal operation, there is a power supply provided at 2.5/3.3V.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.In the absence of external influences, it consumes 500μA current of multiplexer ic.The resistance of the signal switching is 2.The resistance of the signal switching is 8Ohm.Signal switch operation at 85°C temperature is acceptable.Ideally, the temperature of the multiplexer should not exceed -40°C.The mux switch configuration consists of 4 elements.
PI3C3126QE Features
Supplied in the 16-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
PI3C3126QE Applications
There are a lot of Diodes Incorporated PI3C3126QE Signal Switches / Multiplexers / Decoders applications.
- Frequency multiplexing system
- Speed synchronization of multiple motors in industries
- Signal router
- Idle motor
- RF-based home automation system
- Robotic vehicles
- Communication system
- Code converters
- HD surveillance system
- Data demultiplexing
