PI3C3126QEX
| Parameters | |
|---|---|
| Quiescent Current | 500μA |
| Turn On Delay Time | 9.8 ns |
| Family | CB3Q/3VH/3C/2B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 1.75mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 8Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 3126 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 4 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
PI3C3126QEX Overview
Digital switch is provided in the 16-SSOP (0.154, 3.90mm Width) for the purpose of saving board space.The package is in the form of Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.For the analog part of the multiplexers, an IC Bus Switch is used.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.Designers have greater flexibility using digital controlled switch when it works with 2.3V~3.6V voltage.Among its basic configurations are 16 terminations.The base part number is 3126, which is also useful when looking up signal switch's related components.For multiplexer's system, a voltage of 3.3V is supplied.GULL WING is used as the point at which the conductors come to an end as part of this formula.There is a supply type of Single employed as part of this supply.The board has 16 pins configured.As you can see, it is mounted in the direction of Surface Mount.The logic switch is a member of the CB3Q/3VH/3C/2B family.In this signal multiplexer, there are 1 bits that are provided.Keeping the minimum supply voltage (Vsup) at 2.97V prevents some unnecessary failures.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 3.63V.Bus Driver/Transceivers is the classification for this the digital switch ic.It consumes 500μA current of multiplexer ic without external influences.With a supply voltage of 3.3V, reliable performance of the multiplexers can be achieved.As far as the resistance is concerned, it operates with 2.A resistance of 8Ohm is used to operate it.There are 4 elements used for the mux switch configuration.
PI3C3126QEX Features
Supplied in the 16-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
PI3C3126QEX Applications
There are a lot of Diodes Incorporated PI3C3126QEX Signal Switches / Multiplexers / Decoders applications.
- Used to connect a single source to multiple destinations
- Arithmetic Logic Units
- Signal router
- Memory system of computers
- Electronically controlled engine system
- Transmission from the computer system of a satellite
- To select different devices in microprocessor input
- LVDS
- Data demultiplexing
- Solenoid cooling fan
