PI3C3245LE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 8Ohm |
| Terminal Finish | MATTE TIN |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PI3C3245 |
| Operating Supply Voltage | 3.3V |
| Circuit | 8 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 250 ps |
| Quiescent Current | 500μA |
| Turn On Delay Time | 9.8 ns |
| Family | CB3Q/3VH/3C/2B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PI3C3245LE Overview
Due to the fact that it is provided in the 20-TSSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.The package is packaged in accordance with Tube.The mounting method digital switch ic uses is Surface Mount.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.With a supply voltage of 2.3V~3.6V, designers have greater flexibility of digital controlled switch.Its basic configuration includes terminations in the 20 range.The base part number is PI3C3245, which is also useful when looking up signal switch's related components.The multiplexer's system works with 3.3V voltage.As the end of conductors, it uses GULL WING.The supply type of this multiplexer ic is Single.There are 20 pins on it.The mounting is in the way of Surface Mount.In the CB3Q/3VH/3C/2B family, the logic switch is included.Signal multiplexer contains 8 bits.The minimal supply voltage (Vsup) should be kept at 2.97V to avoid some unnecessary failures.The maximal supply voltage (Vsup) should be kept at 3.63V to avoid some unnecessary failures.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.Without any external influences, it consumes 500μA current of multiplexer ic at all times.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 3.3V.The resistance is 2.A resistance of 8Ohm is used to operate it.
PI3C3245LE Features
Supplied in the 20-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
PI3C3245LE Applications
There are a lot of Diodes Incorporated PI3C3245LE Signal Switches / Multiplexers / Decoders applications.
- Analog to digital conversion
- War field flying robot with a night vision flying camera
- Signal router
- Communication system
- Microprocessor input/output systems
- High-performance memory-decoding applications
- Make half adder
- Enabling different rows of memory depending on address in memory chips
- Paper plants
- Image transmission
