PI3C3245QE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 8Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 3245 |
| Circuit | 8 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Power Supplies | 2.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 500μA |
| Turn On Delay Time | 9.8 ns |
| Family | CB3Q/3VH/3C/2B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PI3C3245QE Overview
Digital switch is provided in the 20-SSOP (0.154, 3.90mm Width) for the purpose of saving board space.Tube is the method used for packaging.Digital switch ic adheres to a mounting method of Surface Mount.the multiplexers uses an analog IC Bus Switch.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.When digital controlled switch operates at 2.3V~3.6V, designers have superior flexibility.Among its basic features are 20 terminations.The base part number is 3245, so you can find its logic switch related parts using that number.The voltage supplied for multiplexer's system is 3.3V.multiplexer's systemGULL WING represents the end of conductors.Single is used as its supply type.This multiplexer ic has 20 pins configured.The mounting is in the way of Surface Mount.The logic switch object belongs to the family of CB3Q/3VH/3C/2B.In this signal multiplexer, there are 8 bits provided.To avoid unnecessary failures, keep the supply voltage at 2.97V (Vsup).It is advisable to keep the maximum supply voltage (Vsup) at 3.63V so as to avoid some unnecessary failures.A power supply is provided for mux switch's normal operation of 2.5/3.3V.Bus Driver/Transceivers is a category for the digital switch ics.There are no external influences on this multiplexer ic, so it consumes 500μA current.This signal switching operates at a resistance of 2.With a resistance of 8Ohm, it operates.
PI3C3245QE Features
Supplied in the 20-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
PI3C3245QE Applications
There are a lot of Diodes Incorporated PI3C3245QE Signal Switches / Multiplexers / Decoders applications.
- Time division multiplexing system
- Metal detectors
- Electronic circuits
- Decimal decoder
- To select different devices in microprocessor output
- Electronically controlled engine system
- Home automation system
- Seven segment displays
- Memory chips
- D/A converters
