banner_page

PI3C32X384BE

48 Terminations2.3V~3.6V 48 Pin 32X384 Signal switch2 Functions


  • Manufacturer: Diodes Incorporated
  • Nocochips NO: 233-PI3C32X384BE
  • Package: 48-FSOP (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 325
  • Description: 48 Terminations2.3V~3.6V 48 Pin 32X384 Signal switch2 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 48-FSOP (0.154, 3.90mm Width)
Number of Pins 48
Operating Temperature -40°C~85°C
Packaging Tube
Published 2010
JESD-609 Code e3
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 48
ECCN Code EAR99
Type Bus Switch
Resistance 8Ohm
Terminal Finish Matte Tin (Sn)
Additional Feature ALSO OPERATES WITH 2.5V SUPPLY
Subcategory Bus Driver/Transceivers
Technology CMOS
Voltage - Supply 2.3V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 3.3V
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number 32X384
Circuit 5 x 1:1
Supply Voltage-Max (Vsup) 3.63V
Power Supplies 2.5/3.3V
Supply Voltage-Min (Vsup) 2.97V
Number of Ports 2
Number of Bits 20
Propagation Delay 250 ps
Quiescent Current 1mA
Turn On Delay Time 9.8 ns
Family CB3Q/3VH/3C/2B
Output Characteristics 3-STATE
Supply Type Single
Output Polarity TRUE
High Level Output Current -120mA
Low Level Output Current 120mA
Voltage Supply Source Single Supply
Independent Circuits 4
Height Seated (Max) 2mm
Length 9.9mm
Width 3.9mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

PI3C32X384BE Overview


It is included in the 48-FSOP (0.154, 3.90mm Width) in order to save board space.Tube is the method used for packaging.The method digital switch ic adopts for mounting is Surface Mount.In the multiplexers, the analog IC Bus Switch is used.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Design engineers have more flexibility when digital controlled switch operates at 2.3V~3.6V voltage.Its basic configuration includes terminations in the 48 range.The base part number is 32X384, which can also be used to find its logic switch related parts.In multiplexer's system, 3.3V is the voltage supplied.It employs GULL WING as the point at which conductors come to an end.In this case, the supply type is Single.There are 48 pins on it.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the CB3Q/3VH/3C/2B family.There are 20 bits signal multiplexer provides.It is recommended that the minimum supply voltage (Vsup) be kept at 2.97V to avoid some unnecessary failures.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 3.63V.During mux switch's normal operation, 2.5/3.3V is provided with a power supply.Bus Driver/Transceivers is a category for the digital switch ics.There are no external influences on this multiplexer ic, so it consumes 1mA current.A resistance of 2 is used to operate the signal switching.The resistance of the signal switching is 8Ohm.In addition, it provides improved characteristics compared to ALSO OPERATES WITH 2.5V SUPPLY.

PI3C32X384BE Features


Supplied in the 48-FSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
ALSO OPERATES WITH 2.5V SUPPLY

PI3C32X384BE Applications


There are a lot of Diodes Incorporated PI3C32X384BE Signal Switches / Multiplexers / Decoders applications.

  • To select different task for memory in microprocessor memory systems
  • Recording transmission
  • Data demultiplexing
  • To select different devices in microprocessor input
  • Encrypted communications system
  • Relay
  • Data distribution
  • Medium scale TV wall
  • Automation system
  • Textile mills

Write a review

Note: HTML is not translated!
    Bad           Good