banner_page

PI3C3305LEX

8 Terminations2.3V~3.6V 8 Pin PI3C3305 Signal switch2 Functions


  • Manufacturer: Diodes Incorporated
  • Nocochips NO: 233-PI3C3305LEX
  • Package: 8-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 293
  • Description: 8 Terminations2.3V~3.6V 8 Pin PI3C3305 Signal switch2 Functions(Kg)

Details

Tags

Parameters
Voltage - Supply 2.3V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 3.3V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number PI3C3305
Number of Elements 2
Circuit 1 x 1:1
Supply Voltage-Max (Vsup) 3.63V
Number of Ports 2
Number of Bits 1
Propagation Delay 250 ps
Quiescent Current 500μA
Turn On Delay Time 9.8 ns
Output Characteristics 3-STATE
Supply Type Single
Output Polarity TRUE
High Level Output Current -120mA
Low Level Output Current 120mA
Voltage Supply Source Single Supply
Length 4.4mm
Width 3mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP (0.173, 4.40mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Published 2015
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Bus Switch
Resistance 8Ohm
Technology CMOS

PI3C3305LEX Overview


The reason it is provided is that the board space can be saved by placing digital switch in the 8-TSSOP (0.173, 4.40mm Width).The package is packaged in the manner of Tape & Reel (TR).The method digital switch ic adopts for mounting is Surface Mount.the multiplexers uses IC Bus Switch as the analog IC.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.When digital controlled switch operates at 2.3V~3.6V, designers have superior flexibility.There is a design for terminating 8 as part of its basic configuration.The part number for PI3C3305 can be used to find its logic switch related parts as well.The multiplexer's system is powered by 3.3V volts.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.In this case, the supply type is Single.This multiplexer ic has 8 pins configured.This unit is mounted in the way of Surface Mount.The multiplexer ic provides 1 bits.Avoid unnecessary failures by keeping Vsup at 3.63V.It consumes 500μA current of multiplexer ic without external influences.The resistance is 2.It operates with a resistance of 8Ohm.The mux switch configuration contains 2 elements.

PI3C3305LEX Features


Supplied in the 8-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single

PI3C3305LEX Applications


There are a lot of Diodes Incorporated PI3C3305LEX Signal Switches / Multiplexers / Decoders applications.

  • Small scale TV wall
  • Microprocessor memory systems
  • LVDS
  • Microprocessor input/output systems
  • CPU memory location identification
  • Transmission from the computer system of a satellite
  • Enabling different rows of memory depending on address in memory chips
  • Signal router
  • Analog, digital or video signal switching
  • Injectors

Write a review

Note: HTML is not translated!
    Bad           Good