Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
8Ohm |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Voltage - Supply |
2.3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
3305 |
Operating Supply Voltage |
2.5V |
Number of Elements |
2 |
Circuit |
1 x 1:1 |
Supply Voltage-Max (Vsup) |
3.63V |
Number of Ports |
2 |
Number of Bits |
1 |
Throw Configuration |
SPST |
Propagation Delay |
250 ps |
Quiescent Current |
500μA |
Turn On Delay Time |
9.8 ns |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Output Polarity |
TRUE |
High Level Output Current |
-120mA |
Low Level Output Current |
120mA |
Voltage Supply Source |
Single Supply |
Height Seated (Max) |
1.1mm |
Length |
3mm |
Width |
3mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
PI3C3305UEX Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).In this case, it is packaged as Tape & Reel (TR).Mounting is performed using Surface Mount.The analog IC used in the multiplexers can be referred to as Bus Switch.The operating temperature of -40°C~85°C will not be susceptible to external factors.Using a 2.3V~3.6V supply voltage provides digital controlled switch's superior flexibility for designers.Among its basic features are 8 terminations.The base part number is 3305, which is also useful when looking up signal switch's related components.The multiplexer's system is powered by 3.3V volts.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a type of supply of Single.Currently, it is configured with a 8 pin configuration.It is positioned in the direction of Surface Mount.As a result, signal multiplexer provides 1 bits.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.63V.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.Despite not interacting with external factors, it consumes 500μA current of multiplexer ic.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 2.5V.The resistance of the signal switching is 2.A resistance of 8Ohm is used to operate the signal switching.The mux switch configuration consists of 2 elements.
PI3C3305UEX Features
Supplied in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 2.5V
PI3C3305UEX Applications
There are a lot of Diodes Incorporated PI3C3305UEX Signal Switches / Multiplexers / Decoders applications.
- Automatic Monitoring systems
- Time division multiplexing system
- Code conversion
- Microprocessor instruction decoding
- Injectors
- PCIe
- Signal router
- CPU memory location identification
- Arithmetic Logic Units
- Control unit of Central Processing unit (CPU)