PI3C3306LEX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 8Ohm |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PI3C3306 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.63V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 250 ps |
| Quiescent Current | 500μA |
| Turn On Delay Time | 9.8 ns |
| Logic Function | Buffer |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Length | 4.4mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PI3C3306LEX Overview
In order to conserve board space, digital switch is included in the 8-TSSOP (0.173, 4.40mm Width).In this case, it is packaged as Tape & Reel (TR).Mounting is performed using Surface Mount.As the analog part, the circuit uses an analog IC Bus Switch.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.When operated with a 2.3V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.The basic configuration of this system includes 8 terminations.There is a base part number PI3C3306 that can be used to locate signal switch's related components as well.The multiplexer's system is supplied with a voltage of 3.3V.Conductors terminate at GULL WING in this design.The supply type of this multiplexer ic is Single.The board is configured with 8 pins.The multiplexer ic is mounted in the direction of Surface Mount.In this signal multiplexer, there are 1 bits that are provided.It is advisable that the maximal supply voltage (Vsup) remains at 3.63V to avoid some unnecessary failures.Despite not interacting with external factors, it consumes 500μA current of multiplexer ic.If the supply voltage is set to 3.3V, reliable performance of the multiplexers can be achieved.The resistance of the signal switching is 2.It operates with a resistance of 8Ohm.In the mux switch configuration, there are 2 elements.
PI3C3306LEX Features
Supplied in the 8-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
PI3C3306LEX Applications
There are a lot of Diodes Incorporated PI3C3306LEX Signal Switches / Multiplexers / Decoders applications.
- Code conversion
- Logic circuits
- Make half adder
- Make full adder
- Used to connect a single source to multiple destinations
- A/D converters
- Relay
- Electronics industry
- Robotic vehicles
- To select different devices in microprocessor output
