PI3C34X245BE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-FSOP (0.154, 3.90mm Width) |
| Number of Pins | 80 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 8Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 34X245 |
| Operating Supply Voltage | 3.3V |
| Circuit | 8 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Ports | 2 |
| Number of Bits | 32 |
| Propagation Delay | 250 ps |
| Quiescent Current | 2mA |
| Turn On Delay Time | 9.8 ns |
| Family | CB3Q/3VH/3C/2B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 4 |
| Height Seated (Max) | 2mm |
| Length | 20.5mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PI3C34X245BE Overview
Due to the fact that it is provided in the 80-FSOP (0.154, 3.90mm Width), digital switch allows the board to be compacted.It is packaged according to the Tube method.The method digital switch ic adopts for mounting is Surface Mount.For the analog part of the multiplexers, an IC Bus Switch is used.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.When digital controlled switch operates at 2.3V~3.6V, designers are provided with a greater degree of flexibility.Among its basic features are 80 terminations.There is a base part number 34X245 that can be used to locate signal switch's related components as well.The multiplexer is supplied with 3.3V voltage.GULL WING represents the end of conductors.This supply type employs Single.There are 80 pins on it.The mounting is in the way of Surface Mount.Among the family of CB3Q/3VH/3C/2B the logic switch is a member.As a result, signal multiplexer provides 32 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 2.97V to avoid some unnecessary failures.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 3.63V.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.Without the influence of external factors, it consumes 2mA current of multiplexer ic.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 3.3V.A resistance of 2 governs its operation.A resistance of 8Ohm is used to operate it.
PI3C34X245BE Features
Supplied in the 80-FSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
PI3C34X245BE Applications
There are a lot of Diodes Incorporated PI3C34X245BE Signal Switches / Multiplexers / Decoders applications.
- Electronic circuits
- Encrypted communications system
- CNC machines
- Data-routing applications
- Idle motor
- PCIe
- Code converters
- A robotic vehicle with the metal detector
- LVDS
- Memory chips
