PI3C34X245BEX
| Parameters | |
|---|---|
| Turn On Delay Time | 9.8 ns |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 4 |
| Height Seated (Max) | 2mm |
| Length | 20.5mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-FSOP (0.154, 3.90mm Width) |
| Number of Pins | 80 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 8Ohm |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | PI3C34X245 |
| Operating Supply Voltage | 3.3V |
| Circuit | 8 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Ports | 2 |
| Number of Bits | 32 |
| Propagation Delay | 250 ps |
| Quiescent Current | 2mA |
PI3C34X245BEX Overview
It is included in the 80-FSOP (0.154, 3.90mm Width) in order to save board space.In this case, it is packaged as Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.For the analog part of the multiplexers, an IC Bus Switch is used.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.When digital controlled switch operates at 2.3V~3.6V, designers are provided with a greater degree of flexibility.As parts of its basic configuration, 80 terminations are desgined.To find signal switch's related components, a base part number of PI3C34X245 may also be used.For multiplexer's system, a voltage of 3.3V is supplied.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.There is a supply type of Single employed as part of this supply.This multiplexer ic is configured with 80 pins.The mounting point is Surface Mount.As a result, signal multiplexer provides 32 bits.Keep Vsup at 2.97V to avoid unnecessary failures.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 3.63V.Despite not interacting with external factors, it consumes 2mA current of multiplexer ic.If the supply voltage is set to 3.3V, reliable performance of the multiplexers can be achieved.2 ports are used for some other peripheral signal switchings to plug in.With a resistance of 8Ohm, it operates.
PI3C34X245BEX Features
Supplied in the 80-FSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
PI3C34X245BEX Applications
There are a lot of Diodes Incorporated PI3C34X245BEX Signal Switches / Multiplexers / Decoders applications.
- Microprocessor input/output systems
- Arithmetic Logic Units
- Enabling different functions units in microprocessor instruction decoding
- Image transmission
- Make full adder
- Automatic Monitoring systems
- Audio transmission
- Steel plants
- CNC machines
- Speed synchronization of multiple motors in industries
