PI3C3861-AQE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 5Ohm |
| Terminal Finish | MATTE TIN (787) |
| Subcategory | Bus Driver/Transceivers |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PI3C3861 |
| Qualification Status | Not Qualified |
| Circuit | 10 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Power Supplies | 2.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Ports | 2 |
| Power Dissipation | 500mW |
| Number of Bits | 10 |
| Propagation Delay | 250 ps |
| Quiescent Current | 1mA |
| Turn On Delay Time | 9.8 ns |
| Family | CB3Q/3VH/3C/2B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
PI3C3861-AQE Overview
In order to save board space, digital switch is located in the 24-SSOP (0.154, 3.90mm Width).As a result, it is packaged in a way that is referred to as Tube.In terms of mounting, digital switch ic uses the method of Surface Mount.For the analog part of the multiplexers, an IC Bus Switch is used.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Using a 2.3V~3.6V supply voltage provides digital controlled switch's superior flexibility for designers.Among its basic configurations are 24 terminations.In addition, it also has a base part number of PI3C3861, which can be used to find related parts.In this case, 3.3V is the voltage supplied to the multiplexer's system.A conductor terminates at GULL WING.Its supply type is Single, which is used as the source of power.A configuration of 24 pins is used.The multiplexer ic is mounted in the direction of Surface Mount.The CB3Q/3VH/3C/2B family includes the logic switch.Signal multiplexer contains 10 bits.The minimal supply voltage (Vsup) should be kept at 2.97V to avoid some unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 3.63V in order to prevent some unnecessary failures.In order for 2.5/3.3V to operate normally, a power supply is provided.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.In the absence of external influences, it consumes 1mA current of multiplexer ic.2 is the resistance at which it operates.5Ohm is the resistance at which it operates.
PI3C3861-AQE Features
Supplied in the 24-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
PI3C3861-AQE Applications
There are a lot of Diodes Incorporated PI3C3861-AQE Signal Switches / Multiplexers / Decoders applications.
- Analog to digital conversion
- Electronics industry
- Paper plants
- Encrypted communications system
- Seven segment displays
- Relay
- CNC machines
- To select different task for memory in microprocessor memory systems
- Communication system
- Data bus control
