PI3C3861-AQEX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 8Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PI3C3861 |
| Qualification Status | Not Qualified |
| Circuit | 10 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Power Supplies | 2.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Ports | 2 |
| Number of Bits | 10 |
| Propagation Delay | 9.8 ns |
| Quiescent Current | 1mA |
| Family | CB3Q/3VH/3C/2B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PI3C3861-AQEX Overview
In order to save board space, digital switch is located in the 24-SSOP (0.154, 3.90mm Width).The package is in the form of Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.For the analog part of the multiplexers, an IC Bus Switch is used.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility using digital controlled switch when it works with 2.3V~3.6V voltage.There are 24 terminations included in its basic configuration.The base part number is PI3C3861, which is also useful when looking up signal switch's related components.The multiplexer's system is supplied with a voltage of 3.3V.GULL WING represents the end of conductors.In this case, the supply type is Single.The board is configured with 24 pins.This unit is mounted in the way of Surface Mount.The logic switch is a member of the family of CB3Q/3VH/3C/2B.Signal multiplexer provides 10 bits.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 2.97V.It is advisable to keep the maximum supply voltage (Vsup) at 3.63V so as to avoid some unnecessary failures.In order for 2.5/3.3V to operate normally, a power supply is provided.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.It consumes 1mA current of multiplexer ic without external influences.The system operates with a resistance of 2.In terms of resistance, it has a value of 8Ohm.
PI3C3861-AQEX Features
Supplied in the 24-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
PI3C3861-AQEX Applications
There are a lot of Diodes Incorporated PI3C3861-AQEX Signal Switches / Multiplexers / Decoders applications.
- Automation system
- LVDS
- Used to connect a single source to multiple destinations
- VGA
- Computer memory
- Enabling different rows of memory depending on address in memory chips
- Analog, digital or video signal switching
- Audio transmission
- Electronically controlled engine system
- Frequency multiplexing system
