PI3CH1000LE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 2.25V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 10 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 3CH1000 |
| Operating Supply Voltage | 3.3V |
| Circuit | 5 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Ports | 2 |
| Nominal Supply Current | 800μA |
| Number of Bits | 10 |
| Throw Configuration | SPST |
| Propagation Delay | 300 ps |
| Quiescent Current | 800μA |
| Turn On Delay Time | 15 ns |
| Family | 3CH |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PI3CH1000LE Overview
It is included in the 24-TSSOP (0.173, 4.40mm Width) in order to save board space.Tube is the packaging method.Mounting is performed using Surface Mount.The analog IC used in the multiplexers can be referred to as Bus Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Designers have greater flexibility using digital controlled switch when it works with 2.25V~3.6V voltage.Among its basic configurations are 24 terminations.To find signal switch's related components, a base part number of 3CH1000 may also be used.For multiplexer's system, a voltage of 3.3V is supplied.It employs GULL WING as the point at which conductors come to an end.In this case, Single is employed as the supply type.Currently, it is configured with a 24 pin configuration.The mounting is in the way of Surface Mount.The logic switch is a member of the 3CH family.Signal multiplexer contains 10 bits.Keep Vsup at 3V to avoid unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V in order to prevent some unnecessary failures.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.It consumes 800μA current of multiplexer ic without external influences.If the supply voltage is 3.3V, reliable performance of the multiplexers can be achieved.The resistance of the signal switching is 2.With a resistance of 7Ohm, it operates.Also, it provides an improved version of the characteristics of ALSO OPERATES AT 3.3V SUPPLY.
PI3CH1000LE Features
Supplied in the 24-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
ALSO OPERATES AT 3.3V SUPPLY
PI3CH1000LE Applications
There are a lot of Diodes Incorporated PI3CH1000LE Signal Switches / Multiplexers / Decoders applications.
- RF-based home automation system
- Encrypted communications system
- To select different devices in microprocessor output
- CNC machines
- Microprocessor memory systems
- Automatic health monitoring systems
- Recording transmission
- Enabling different functions units in microprocessor instruction decoding
- Night vision cameras
- Make full adder
