Parameters |
Factory Lead Time |
1 Week |
Mounting Type |
Surface Mount |
Package / Case |
24-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
7Ohm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Voltage - Supply |
2.25V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
10 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Frequency Stability |
30 ppm |
Operating Supply Voltage |
3.3V |
Circuit |
5 x 1:1 |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
3V |
Load Capacitance |
30pF |
Number of Ports |
2 |
Number of Bits |
1 |
Frequency Tolerance |
0.002% |
Propagation Delay |
300 ps |
Family |
3CH |
Output Characteristics |
3-STATE |
Output Polarity |
TRUE |
High Level Output Current |
-120mA |
Low Level Output Current |
120mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
2 |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
PI3CH1000LEX Overview
This is a relatively small item of digital switch that is included in the 24-TSSOP (0.173, 4.40mm Width) in order to save space on the board.The package is in the form of Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.A digital IC Bus Switch is used as the analog component of the multiplexers.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility when digital controlled switch operates at a 2.25V~3.6V supply voltage.There are 24 terminations included in its basic configuration.The turn signal switch is supplied with a voltage of 3.3V volts.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There are 8 pins on it.The logic switch is a member of the 3CH family.There are 1 bits in signal multiplexer.It is recommended that the minimum supply voltage (Vsup) be kept at 3V so that unnecessary failures can be prevented.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 3.3V.A resistance of 2 is used to operate the signal switching.It operates with a resistance of 7Ohm.
PI3CH1000LEX Features
Supplied in the 24-TSSOP (0.173, 4.40mm Width) package
Operating with the supply voltage of 3.3V
PI3CH1000LEX Applications
There are a lot of Diodes Incorporated PI3CH1000LEX Signal Switches / Multiplexers / Decoders applications.
- A robotic vehicle with the metal detector
- Night vision cameras
- Image transmission
- Automatic Monitoring systems
- HDMI applications
- Data communication
- Enabling block of memory depending on address in memory chips
- Arithmetic Logic Units
- Code converters
- Medium scale TV wall