PI3CH200LE
| Parameters | |
|---|---|
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 2.25V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 3CH200 |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Propagation Delay | 300 ps |
| Quiescent Current | 800μA |
| Turn On Delay Time | 15 ns |
| Family | 3CH |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Length | 4.4mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2015 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY |
PI3CH200LE Overview
Providing this information in the 8-TSSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.As a result, it is packaged in the way of Tube.In terms of mounting, digital switch ic uses the method of Surface Mount.A digital IC Bus Switch is used as the analog component of the multiplexers.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Design engineers have more flexibility when digital controlled switch operates at 2.25V~3.6V voltage.Its basic configuration includes terminations in the 8 range.Its logic switch base part number is 3CH200 which can also be used to find its logic switch related parts.The multiplexer is supplied with 2.5V voltage.At the end of a conductor, it uses GULL WING as the point where the conductor ends.In this case, Single is employed as the supply type.The board is configured with 8 pins.It is mounted in the way of Surface Mount.The logic switch belongs to the family of 3CH.Signal multiplexer contains 1 bits.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.In the absence of external influences, it consumes 800μA current of multiplexer ic.2 ports are used for some other peripheral signal switchings to plug in.The system operates with a resistance of 7Ohm.In addition, ALSO OPERATES AT 3.3V SUPPLY exhibits improved characteristics.There are 2 elements used for the mux switch configuration.
PI3CH200LE Features
Supplied in the 8-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
ALSO OPERATES AT 3.3V SUPPLY
PI3CH200LE Applications
There are a lot of Diodes Incorporated PI3CH200LE Signal Switches / Multiplexers / Decoders applications.
- Signal router
- Time division multiplexing system
- Speed synchronization of multiple motors in industries
- Electronics industry
- Logic gates for other digital devices
- Solenoid cooling fan
- High-performance memory-decoding applications
- Data demultiplexing
- Transmission from the computer system of a satellite
- Arithmetic Logic Units
