banner_page

PI3CH200LEX

8 Terminations2.25V~3.6V 8 Pin PI3CH200 Signal switch2 Functions


  • Manufacturer: Diodes Incorporated
  • Nocochips NO: 233-PI3CH200LEX
  • Package: 8-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 138
  • Description: 8 Terminations2.25V~3.6V 8 Pin PI3CH200 Signal switch2 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP (0.173, 4.40mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Bus Switch
Resistance 7Ohm
Additional Feature ALSO OPERATES AT 3.3V SUPPLY
Subcategory Bus Driver/Transceivers
Technology CMOS
Voltage - Supply 2.25V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 2.5V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number PI3CH200
Operating Supply Voltage 3.3V
Number of Elements 2
Circuit 1 x 1:1
Number of Ports 2
Number of Bits 1
Propagation Delay 300 ps
Quiescent Current 800μA
Turn On Delay Time 15 ns
Family 3CH
Output Characteristics 3-STATE
Supply Type Single
Output Polarity TRUE
High Level Output Current -120mA
Low Level Output Current 120mA
Voltage Supply Source Single Supply
Length 4.4mm
Width 3mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

PI3CH200LEX Overview


The reason it is provided is that the board space can be saved by placing digital switch in the 8-TSSOP (0.173, 4.40mm Width).As a result, it is packaged in a way that is referred to as Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.the multiplexers uses an analog IC Bus Switch.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.When operated with a 2.25V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.This configuration includes 8 terminations as part of its basic functionality.There is a base part number of PI3CH200 which can also be used in order to locate the logic switch that are related to this item.In multiplexer's system, 2.5V is the voltage supplied.As a result, conductors end at GULL WING.This supply type employs Single.This multiplexer ic has 8 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the 3CH family.There are 1 bits signal multiplexer provides.This is an the digital switch ic that is classified as Bus Driver/Transceivers.In the absence of external influences, it consumes 800μA current of multiplexer ic.Using a supply voltage of 3.3V can result in reliable performance of the multiplexers.With a resistance of 0, it operates.The resistance of the signal switching is 7Ohm.Furthermore, the characteristics of ALSO OPERATES AT 3.3V SUPPLY have been improved.The mux switch configuration contains 2 elements.

PI3CH200LEX Features


Supplied in the 8-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
ALSO OPERATES AT 3.3V SUPPLY

PI3CH200LEX Applications


There are a lot of Diodes Incorporated PI3CH200LEX Signal Switches / Multiplexers / Decoders applications.

  • Arithmetic Logic Units
  • Speed synchronization of multiple motors in industries
  • LVDS
  • Video transmission
  • High-performance memory systems
  • Robotic vehicles
  • CPU memory location identification
  • Make half adder
  • A robotic vehicle with the metal detector
  • Enabling different rows of memory depending on address in memory chips

Write a review

Note: HTML is not translated!
    Bad           Good