PI3CH400LE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Terminal Finish | MATTE TIN (787) |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 2.25V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 3CH400 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Max (Vsup) | 2.75V |
| Power Supplies | 2.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.25V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 300 ps |
| Family | 3CH |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 4 |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PI3CH400LE Overview
In order to save board space, digital switch is located in the 14-TSSOP (0.173, 4.40mm Width).The package is packaged in accordance with Tube.In terms of mounting, digital switch ic uses the method of Surface Mount.The analog IC in the multiplexers is identified as Bus Switch.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 2.25V~3.6V.provides digital controlled switch's digital controlled switch'sThere is a design for terminating 16 as part of its basic configuration.In addition, it also has a base part number of 3CH400, which can be used to find related parts.In multiplexer's system, 2.5V is the voltage supplied.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Single is employed as its supply type.With 16 pins, it is configured.The mounting point is Surface Mount.The logic switch is included into the family of 3CH.As a result, signal multiplexer provides 1 bits.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 2.25V.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 2.75V.During mux switch's normal operation, 2.5/3.3V is provided with a power supply.This is a signal switch that is categorized as Bus Driver/Transceivers.This signal switching operates at a resistance of 2.With a resistance of 7Ohm, it operates.In addition, it provides improved features of ALSO OPERATES AT 3.3V SUPPLY.
PI3CH400LE Features
Supplied in the 14-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
ALSO OPERATES AT 3.3V SUPPLY
PI3CH400LE Applications
There are a lot of Diodes Incorporated PI3CH400LE Signal Switches / Multiplexers / Decoders applications.
- Analog to digital conversion
- CPU memory location identification
- Combinational circuit
- To select different task for memory in microprocessor memory systems
- Logic circuits
- LVDS
- Medical industry
- Injectors
- RF-based home automation system
- Data distribution
