banner_page

PI3CH400LEX

16 Terminations2.25V~3.6V 16 Pin Signal switch4 Functions


  • Manufacturer: Diodes Incorporated
  • Nocochips NO: 233-PI3CH400LEX
  • Package: 14-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 571
  • Description: 16 Terminations2.25V~3.6V 16 Pin Signal switch4 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case 14-TSSOP (0.173, 4.40mm Width)
Surface Mount YES
Number of Pins 16
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Published 2015
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Type Bus Switch
Resistance 7Ohm
Terminal Finish MATTE TIN
Additional Feature ALSO OPERATES AT 3.3V SUPPLY
Subcategory Bus Driver/Transceivers
Technology CMOS
Voltage - Supply 2.25V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 2.5V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 40
Circuit 1 x 1:1
Supply Voltage-Max (Vsup) 2.75V
Power Supplies 2.5/3.3V
Supply Voltage-Min (Vsup) 2.25V
Number of Ports 2
Number of Bits 1
Propagation Delay 300 ps
Family 3CH
Output Characteristics 3-STATE
Output Polarity TRUE
High Level Output Current -120mA
Low Level Output Current 120mA
Voltage Supply Source Single Supply
Independent Circuits 4
Height Seated (Max) 1.2mm
Length 5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant

PI3CH400LEX Overview


Due to the lack of space on the board, digital switch is provided in the 14-TSSOP (0.173, 4.40mm Width).As a result, it is packaged in the way of Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.As the analog part, the circuit uses an analog IC Bus Switch.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 2.25V~3.6V, designers have superior flexibility.Among its basic configurations are 16 terminations.In multiplexer's system, 2.5V is the voltage supplied.GULL WING represents the end of conductors.A total of 16 pins are configured on this board.The logic switch is a member of the 3CH family.In this signal multiplexer, there are 1 bits that are provided.Keep Vsup at 2.25V to avoid unnecessary failures.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 2.75V.For mux switch's normal operation, power supply 2.5/3.3V is provided.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.The resistance of the signal switching is 2.7Ohm is the resistance at which it operates.In addition, it provides improved characteristics compared to ALSO OPERATES AT 3.3V SUPPLY.

PI3CH400LEX Features


Supplied in the 14-TSSOP (0.173, 4.40mm Width) package
Power supplies of 2.5/3.3V
ALSO OPERATES AT 3.3V SUPPLY

PI3CH400LEX Applications


There are a lot of Diodes Incorporated PI3CH400LEX Signal Switches / Multiplexers / Decoders applications.

  • To select different task for memory in microprocessor memory systems
  • Enabling different rows of memory depending on address in memory chips
  • Code converters
  • Home automation system
  • Solenoid cooling fan
  • Analog to digital conversion
  • Speed control of medern motors
  • Image transmission
  • Audio transmission
  • D/A converters

Write a review

Note: HTML is not translated!
    Bad           Good