banner_page

PI3CH401LE

16 Terminations2.25V~3.6V 16 Pin 3CH401 Signal switch4 Functions


  • Manufacturer: Diodes Incorporated
  • Nocochips NO: 233-PI3CH401LE
  • Package: 14-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 574
  • Description: 16 Terminations2.25V~3.6V 16 Pin 3CH401 Signal switch4 Functions(Kg)

Details

Tags

Parameters
Number of Bits 1
Propagation Delay 300 ps
Family CB3Q/3VH/3C/2B
Output Characteristics 3-STATE
Supply Type Single
Output Polarity TRUE
High Level Output Current -120mA
Low Level Output Current 120mA
Voltage Supply Source Single Supply
Independent Circuits 4
Height Seated (Max) 1.2mm
Length 5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 14-TSSOP (0.173, 4.40mm Width)
Number of Pins 16
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e3
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Type Bus Switch
Resistance 7Ohm
Terminal Finish Matte Tin (Sn)
Additional Feature ALSO OPERATES AT 3.3V SUPPLY
Subcategory Bus Driver/Transceivers
Technology CMOS
Voltage - Supply 2.25V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 2.5V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number 3CH401
Circuit 1 x 1:1
Supply Voltage-Max (Vsup) 2.75V
Power Supplies 2.5/3.3V
Supply Voltage-Min (Vsup) 2.25V
Number of Ports 2

PI3CH401LE Overview


Providing this information in the 14-TSSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.As a result, it is packaged in the way of Tube.In terms of mounting, digital switch ic uses the Surface Mount method .The analog IC used in the multiplexers can be referred to as Bus Switch.The operating temperature of -40°C~85°C will not be susceptible to external factors.When digital controlled switch operates at 2.25V~3.6V, designers are provided with a greater degree of flexibility.Among its basic features are 16 terminations.The base part number is 3CH401, which can also be used to find its logic switch related parts.The multiplexer is supplied with 2.5V voltage.At the end of a conductor, it uses GULL WING as the point where the conductor ends.In this case, the supply type is Single.This multiplexer ic has 16 pins configured.The mount is in Surface Mount.In the CB3Q/3VH/3C/2B family, the logic switch is included.As a result, signal multiplexer provides 1 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2.25V.It is advisable to keep the maximum supply voltage (Vsup) at 2.75V in order to prevent some unnecessary failures.During mux switch's normal operation, 2.5/3.3V is provided with a power supply.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.With a resistance of 0, it operates.In terms of resistance, it has a value of 7Ohm.Additionally, ALSO OPERATES AT 3.3V SUPPLY provides improved characteristics.

PI3CH401LE Features


Supplied in the 14-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
ALSO OPERATES AT 3.3V SUPPLY

PI3CH401LE Applications


There are a lot of Diodes Incorporated PI3CH401LE Signal Switches / Multiplexers / Decoders applications.

  • Encrypted communications system
  • Microprocessor memory systems
  • Data transfer
  • Speed control of medern motors
  • Data-routing applications
  • Steel plants
  • Idle motor
  • Transmission from the computer system of a satellite
  • To select different devices in microprocessor output
  • Data distribution

Write a review

Note: HTML is not translated!
    Bad           Good