PI3CH480LE
| Parameters | |
|---|---|
| Published | 2014 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer/Demultiplexer |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 2.25V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 3CH480 |
| Number of Outputs | 1 |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 2.75V |
| Power Supplies | 2.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.25V |
| Number of Circuits | 4 |
| Number of Bits | 8 |
| Throw Configuration | SPDT |
| Propagation Delay | 300 ps |
| Quiescent Current | 800μA |
| Turn On Delay Time | 15 ns |
| Family | 3CH |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
PI3CH480LE Overview
Providing this information in the 16-TSSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.In this case, it is packaged as Tube.In terms of mounting, digital switch ic uses the method of Surface Mount.A digital IC Multiplexer/Demultiplexer is used as the analog component of the multiplexers.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.Using a 2.25V~3.6V supply voltage provides digital controlled switch's superior flexibility for designers.Its basic configuration includes terminations in the 16 range.To find signal switch's related components, a base part number of 3CH480 may also be used.The multiplexer is supplied with 2.5V voltage.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.In this case, the supply type is Single.This multiplexer ic is configured with 16 pins.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is included into the family of 3CH.There are 8 bits in signal multiplexer.The minimal supply voltage (Vsup) should be kept at 2.25V to avoid some unnecessary failures.Keeping Vsup at 2.75V will prevent some unnecessary failures.It is provided that 2.5/3.3V has a power supply in order to function normally.As part of the operation of this turn signal switch, there are 1 outputs.This is a signal switch that is categorized as Other Logic ICs.No external influence consumes 800μA current of multiplexer ic.In addition, ALSO OPERATES AT 3.3V SUPPLY provides improved characteristics.To operate the digitalswitch normally, 4 circuits are formed.
PI3CH480LE Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
ALSO OPERATES AT 3.3V SUPPLY
PI3CH480LE Applications
There are a lot of Diodes Incorporated PI3CH480LE Signal Switches / Multiplexers / Decoders applications.
- Textile mills
- Microprocessor instruction decoding
- Electronic circuits
- Speed synchronization of multiple motors in industries
- Enabling different rows of memory depending on address in memory chips
- Seven segment displays
- Data bus control
- High-performance memory-decoding applications
- Electronically controlled engine system
- A robotic vehicle with the metal detector
