PI3CH480LEX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 7Ohm |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 2.25V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | PI3CH480 |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 2.75V |
| Power Supplies | 2.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.25V |
| Number of Bits | 8 |
| Propagation Delay | 300 ps |
| Quiescent Current | 800μA |
| Turn On Delay Time | 15 ns |
| Family | 3CH |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 4 |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PI3CH480LEX Overview
Due to the lack of space on the board, digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width).Tape & Reel (TR) represents its packaging.Mounting is performed using Surface Mount.A digital IC Multiplexer/Demultiplexer is used as the analog component of the multiplexers.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.Using a 2.25V~3.6V supply voltage provides digital controlled switch's superior flexibility for designers.Among its basic configurations are 16 terminations.The base part number is PI3CH480, which is also useful when looking up signal switch's related components.The turn signal switch is supplied with a voltage of 2.5V volts.It employs GULL WING as the point at which conductors come to an end.In this case, the supply type is Single.Currently, it is configured with a 16 pin configuration.It is mounted in the way of Surface Mount.The logic switch is a member of the 3CH family.Signal multiplexer provides 8 bits.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 2.25V.Keeping Vsup at 2.75V will prevent some unnecessary failures.It is provided that 2.5/3.3V has a power supply in order to function normally.This is a signal switch that is categorized as Other Logic ICs.Despite not interacting with external factors, it consumes 800μA current of multiplexer ic.A resistance of 7Ohm is used to operate it.Signal sources consist of output lines of 4.In addition, ALSO OPERATES AT 3.3V SUPPLY provides improved characteristics.
PI3CH480LEX Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
4 output lines
ALSO OPERATES AT 3.3V SUPPLY
PI3CH480LEX Applications
There are a lot of Diodes Incorporated PI3CH480LEX Signal Switches / Multiplexers / Decoders applications.
- Analog to digital conversion
- Video transmission
- Recording transmission
- VGA
- Telephone network
- Make half adder
- PCIe
- D/A converters
- Small scale TV wall
- A robotic vehicle with the metal detector
