PI3CH480QE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 5Ohm |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 2.25V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 3CH480 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 3.3V |
| Circuit | 4 x 2:1 |
| Number of Channels | 4 |
| Power Dissipation | 500mW |
| Throw Configuration | SPDT |
| Propagation Delay | 15 ns |
| Quiescent Current | 800μA |
| Turn On Delay Time | 15 ns |
| Family | 3CH |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Number of Drivers | 2 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PI3CH480QE Overview
Providing this information in the 16-SSOP (0.154, 3.90mm Width) enables digital switch board space to be saved.The package is in the form of Tube.As far as mounting is concerned, digital switch ic uses Surface Mount.In the multiplexers, the analog IC Multiplexer/Demultiplexer is used.The operating temperature of -40°C~85°C will not be susceptible to external factors.When digital controlled switch operates at 2.25V~3.6V, designers have superior flexibility.It is designed with 16 terminations as part of its basic configuration.The base part number is 3CH480, so you can find its logic switch related parts using that number.In multiplexer's system, 2.5V is the voltage supplied.Conductors terminate at GULL WING in this design.There is a type of supply of Single.A total of 16 pins are configured on this board.The mount is in Surface Mount.Among the family of 3CH the logic switch is a member.As part of the operation of this turn signal switch, there are 4 outputs.The digital switch ic is an electronic part classified into Other Logic ICs.Without the influence of external factors, it consumes 800μA current of multiplexer ic.Supply voltages of 3.3V can provide reliable performance of the multiplexers.In this multiplexer, there is a total of 8 inputs.In terms of resistance, it has a value of 5Ohm.Transmission is carried out over 4 channels in the turn signal switch's circuit.Also, it provides an improved version of the characteristics of ALSO OPERATES AT 3.3V SUPPLY.
PI3CH480QE Features
Supplied in the 16-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
ALSO OPERATES AT 3.3V SUPPLY
PI3CH480QE Applications
There are a lot of Diodes Incorporated PI3CH480QE Signal Switches / Multiplexers / Decoders applications.
- Textile mills
- Data bus control
- Analog, digital or video signal switching
- Microprocessor memory systems
- Microprocessor input/output systems
- Time division multiplexing system
- Night vision cameras
- Combinational circuit
- LVDS
- CPU memory location identification
