banner_page

PI3CH800LE

20 Terminations1.8V 2.5V 3.3V 20 Pin 3CH800 Signal switch8 Functions


  • Manufacturer: Diodes Incorporated
  • Nocochips NO: 233-PI3CH800LE
  • Package: 20-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 690
  • Description: 20 Terminations1.8V 2.5V 3.3V 20 Pin 3CH800 Signal switch8 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-TSSOP (0.173, 4.40mm Width)
Number of Pins 20
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 2015
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Type Bus Switch
Resistance 7Ohm
Terminal Finish MATTE TIN
Additional Feature ALSO OPERATES AT 3.3V SUPPLY
Subcategory Bus Driver/Transceivers
Technology CMOS
Voltage - Supply 1.8V 2.5V 3.3V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 8
Supply Voltage 2.5V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number 3CH800
Circuit 1 x 8:8
Supply Voltage-Max (Vsup) 2.75V
Power Supplies 2.5/3.3V
Supply Voltage-Min (Vsup) 2.25V
Number of Ports 2
Number of Bits 8
Throw Configuration SPST
Propagation Delay 300 ps
Quiescent Current 800μA
Turn On Delay Time 15 ns
Family 3CH
Output Characteristics 3-STATE
Supply Type Single
Output Polarity TRUE
High Level Output Current -120mA
Low Level Output Current 120mA
Voltage Supply Source Single Supply
Independent Circuits 1
Length 6.5mm
Width 4.4mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

PI3CH800LE Overview


The reason it is provided is that the board space can be saved by placing digital switch in the 20-TSSOP (0.173, 4.40mm Width).Tube is the method used for packaging.Digital switch ic adheres to a mounting method of Surface Mount.A digital IC Bus Switch is used as the analog component of the multiplexers.As long as the operating temperature is -40°C~85°C TA, turn signal switch will not be influenced by external factors.When digital controlled switch operates at 1.8V 2.5V 3.3V, designers are provided with a greater degree of flexibility.Among its basic features are 20 terminations.The part number for 3CH800 can be used to find its logic switch related parts as well.For multiplexer's system, a voltage of 2.5V is supplied.GULL WING is used as the point at which the conductors come to an end as part of this formula.The supply type of this multiplexer ic is Single.Currently, it is configured with 20 pins.Multiplexer ics are mounted in the direction of Surface Mount.The 3CH family includes the logic switch.In this signal multiplexer, there are 8 bits provided.It is recommended that the minimum supply voltage (Vsup) be kept at 2.25V to avoid some unnecessary failures.Keeping Vsup at 2.75V will prevent some unnecessary failures.Normally, 2.5/3.3V is powered by a battery.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.Despite not interacting with external factors, it consumes 800μA current of multiplexer ic.2 ports are used for some other peripheral signal switchings to plug in.The resistance of the signal switching is 7Ohm.Additionally, it improves the characteristics of ALSO OPERATES AT 3.3V SUPPLY.

PI3CH800LE Features


Supplied in the 20-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
ALSO OPERATES AT 3.3V SUPPLY

PI3CH800LE Applications


There are a lot of Diodes Incorporated PI3CH800LE Signal Switches / Multiplexers / Decoders applications.

  • Automatic health monitoring systems
  • Seven segment displays
  • Communication system
  • Audio transmission
  • Memory chips
  • VGA
  • Code conversion
  • To select different devices in microprocessor input
  • Data communication
  • Medium scale TV wall

Write a review

Note: HTML is not translated!
    Bad           Good