PI3CH800LEX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 1.8V 2.5V 3.3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 8 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PI3CH800 |
| JESD-30 Code | R-PDSO-G20 |
| Operating Supply Voltage | 3.3V |
| Circuit | 1 x 8:8 |
| Supply Voltage-Max (Vsup) | 2.75V |
| Supply Voltage-Min (Vsup) | 2.25V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 300 ps |
| Quiescent Current | 800μA |
| Turn On Delay Time | 15 ns |
| Family | 3CH |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PI3CH800LEX Overview
Providing this information in the 20-TSSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.A digital IC Bus Switch is used as the analog component of the multiplexers.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C TA.With a supply voltage of 1.8V 2.5V 3.3V, designers have greater flexibility of digital controlled switch.The basic configuration of this system includes 20 terminations.In addition, it also has a base part number of PI3CH800, which can be used to find related parts.The multiplexer's system is supplied with a voltage of 2.5V.A conductor terminates at GULL WING.There is a type of supply Single that is employed in this case.The board is configured with 48 pins.The mounting point is Surface Mount.In the 3CH family, the logic switch is included.In the signal multiplexer, there are 8 bits available.Keeping the minimum supply voltage (Vsup) at 2.25V prevents some unnecessary failures.The maximal supply voltage (Vsup) should be kept at 2.75V to avoid some unnecessary failures.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.In the absence of external influences, it consumes 800μA current of multiplexer ic.If the supply voltage is 3.3V, reliable performance of the multiplexers can be achieved.This signal switching operates at a resistance of 2.The resistance of the signal switching is 7Ohm.In addition, it provides improved characteristics compared to ALSO OPERATES AT 3.3V SUPPLY.
PI3CH800LEX Features
Supplied in the 20-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
ALSO OPERATES AT 3.3V SUPPLY
PI3CH800LEX Applications
There are a lot of Diodes Incorporated PI3CH800LEX Signal Switches / Multiplexers / Decoders applications.
- Metal detectors
- Idle motor
- Microprocessor instruction decoding
- High-performance memory systems
- Code converters
- Logic circuits
- Solenoid cooling fan
- Control unit of Central Processing unit (CPU)
- Time division multiplexing system
- Memory chips
