banner_page

PI3CH800QE

20 Terminations1.8V 2.5V 3.3V 20 Pin 3CH800 Signal switch8 Functions


  • Manufacturer: Diodes Incorporated
  • Nocochips NO: 233-PI3CH800QE
  • Package: 20-SSOP (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 261
  • Description: 20 Terminations1.8V 2.5V 3.3V 20 Pin 3CH800 Signal switch8 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SSOP (0.154, 3.90mm Width)
Number of Pins 20
Operating Temperature -40°C~85°C TA
Packaging Tube
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Type Bus Switch
Resistance 7Ohm
Additional Feature ALSO OPERATES AT 3.3V SUPPLY
Subcategory Bus Driver/Transceivers
Technology CMOS
Voltage - Supply 1.8V 2.5V 3.3V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 8
Supply Voltage 2.5V
Terminal Pitch 0.635mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number 3CH800
Circuit 1 x 8:8
Supply Voltage-Max (Vsup) 2.75V
Power Supplies 2.5/3.3V
Supply Voltage-Min (Vsup) 2.25V
Number of Ports 2
Number of Bits 8
Throw Configuration SPST
Propagation Delay 300 ps
Quiescent Current 800μA
Turn On Delay Time 15 ns
Family 3CH
Output Characteristics 3-STATE
Supply Type Single
Output Polarity TRUE
High Level Output Current -120mA
Low Level Output Current 120mA
Voltage Supply Source Single Supply
Independent Circuits 1
Width 3.9mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

PI3CH800QE Overview


In order to conserve board space, digital switch is included in the 20-SSOP (0.154, 3.90mm Width).Tube is the packaging method.Digital switch ic uses a Surface Mount mounting method.The analog IC used in the multiplexers can be referred to as Bus Switch.A temperature of -40°C~85°C TA will not leave the turn signal swturn signal switchch susceptible to external influences.Designers have greater flexibility using digital controlled switch when it works with 1.8V 2.5V 3.3V voltage.As parts of its basic configuration, 20 terminations are desgined.The base part number is 3CH800, which is also useful when looking up signal switch's related components.For multiplexer's system, 2.5V voltage is supplied.GULL WING is used as the point at which the conductors come to an end as part of this formula.This supply type employs Single.A total of 20 pins are configured on this board.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the family of 3CH.Signal multiplexer consists of 8 bits.To avoid unnecessary failures, keep the supply voltage at 2.25V (Vsup).Keeping Vsup at 2.75V will prevent some unnecessary failures.The power supply of 2.5/3.3V is provided for mux switch's normal operation.Bus Driver/Transceivers is the classification for this the digital switch ic.Not being affected by the external factors, consumes 800μA current of multiplexer ic.The signal switching operates with a resistance of 2.It operates with a resistance of 7Ohm.In addition, it provides improved characteristics compared to ALSO OPERATES AT 3.3V SUPPLY.

PI3CH800QE Features


Supplied in the 20-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
ALSO OPERATES AT 3.3V SUPPLY

PI3CH800QE Applications


There are a lot of Diodes Incorporated PI3CH800QE Signal Switches / Multiplexers / Decoders applications.

  • Transmission from the computer system of a satellite
  • Steel plants
  • High-performance memory-decoding applications
  • Enabling block of memory depending on address in memory chips
  • Make half adder
  • Home automation system
  • Implementing boolean functions with multiple variables
  • High-performance memory systems
  • To select different devices in microprocessor input
  • Communication system

Write a review

Note: HTML is not translated!
    Bad           Good