PI3LVD512ZFE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-WFQFN Exposed Pad |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 5Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 500mW |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Operating Supply Voltage | 3.3V |
| Circuit | 5 x 4:2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Channels | 5 |
| High Level Output Current | 120mA |
| Off-state Isolation-Nom | 41 dB |
| Voltage Supply Source | Single Supply |
| On-state Resistance Match-Nom | 0.9Ohm |
| Independent Circuits | 1 |
| Switch-off Time-Max | 9ns |
| Height Seated (Max) | 0.8mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PI3LVD512ZFE Overview
Digital switch is provided in the 56-WFQFN Exposed Pad for the purpose of saving board space.Tray is the packaging method.Surface Mount is the mounting method digital switch ic uses.the multiplexers uses an analog IC Multiplexer/Demultiplexer.The operating temperature of -40°C~85°C will not be susceptible to external factors.When digital controlled switch operates at 3V~3.6V, designers are provided with a greater degree of flexibility.Among its basic configurations are 56 terminations.The multiplexer is supplied with 3.3V voltage.With 56 pins, it is configured.This unit is mounted in the way of Surface Mount.Keeping Vsup at 2.97V will prevent some unwanted failures.Avoid unnecessary failures by keeping Vsup at 3.63V.When a supply voltage of 3.3V is used, reliable performance of the multiplexers can be achieved.A resistance of 5Ohm is used to operate the signal switching.There are a total of 5 channels used for transmitting data in the turn signal switch's circuit.
PI3LVD512ZFE Features
Supplied in the 56-WFQFN Exposed Pad package
Operating with the supply voltage of 3.3V
PI3LVD512ZFE Applications
There are a lot of Diodes Incorporated PI3LVD512ZFE Signal Switches / Multiplexers / Decoders applications.
- Steel plants
- Relay
- Enabling different rows of memory depending on address in memory chips
- Analog to digital conversion
- GLAN
- Communication system
- Idle motor
- Telephone network
- Memory chips
- Automatic Monitoring systems
