banner_page

PI3VT3306LEX

8 Terminations2.3V~2.7V 3V~3.6V 8 Pin PI3VT3306 Signal switch2 Functions


  • Manufacturer: Diodes Incorporated
  • Nocochips NO: 233-PI3VT3306LEX
  • Package: 8-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 158
  • Description: 8 Terminations2.3V~2.7V 3V~3.6V 8 Pin PI3VT3306 Signal switch2 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP (0.173, 4.40mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Published 2004
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Bus Switch
Resistance 25Ohm
Technology CMOS
Voltage - Supply 2.3V~2.7V 3V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 3.3V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number PI3VT3306
Number of Elements 2
Circuit 1 x 1:1
Supply Voltage-Max (Vsup) 3.63V
Number of Ports 2
Number of Bits 1
Propagation Delay 250 ps
Quiescent Current 3μA
Turn On Delay Time 9.8 ns
Family 3VT
Output Characteristics 3-STATE
Supply Type Single
Output Polarity TRUE
High Level Output Current -120mA
Low Level Output Current 120mA
Voltage Supply Source Single Supply
Length 4.4mm
Width 3mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

PI3VT3306LEX Overview


In order to save board space, digital switch is located in the 8-TSSOP (0.173, 4.40mm Width).It is packaged according to the Tape & Reel (TR) method.digital switch ic uses the method of Surface Mount for mounting.In the multiplexers, the analog IC is indicated by Bus Switch.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.A supply voltage of 2.3V~2.7V 3V~3.6V provides digital controlled switch's superior flexibility for designers.There is a design for terminating 8 as part of its basic configuration.There is a base part number of PI3VT3306 which can also be used in order to locate the logic switch that are related to this item.In multiplexer's system, 3.3V is the voltage supplied.It employs GULL WING as the point at which conductors come to an end.There is a type of supply Single that is employed in this case.A total of 8 pins are configured on this board.The mounting is in the way of Surface Mount.The logic switch is a member of the family of 3VT.In this signal multiplexer, there are 1 bits that are provided.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.63V.Without the influence of external factors, it consumes 3μA current of multiplexer ic.The signal switching operates with a resistance of 2.A resistance of 25Ohm is used to operate it.The mux switch configuration consists of 2 elements.

PI3VT3306LEX Features


Supplied in the 8-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single

PI3VT3306LEX Applications


There are a lot of Diodes Incorporated PI3VT3306LEX Signal Switches / Multiplexers / Decoders applications.

  • Used to connect a single source to multiple destinations
  • Combinational circuit
  • Steel plants
  • Data communication
  • Data collection system
  • Memory chips
  • Make half adder
  • Make full adder
  • War field flying robot with a night vision flying camera
  • Time division multiplexing system

Write a review

Note: HTML is not translated!
    Bad           Good