PI3VT3306UEX
| Parameters | |
|---|---|
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 25Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Voltage - Supply | 2.3V~2.7V 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 3306 |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Number of Ports | 2 |
| Number of Bits | 2 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 9.8 ns |
| Family | 3VT |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
PI3VT3306UEX Overview
For the purpose of saving board space, digital switch is included in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).As a result, it is packaged in the way of Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.The analog IC in the multiplexers is identified as Bus Switch.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 2.3V~2.7V 3V~3.6V, designers have superior flexibility.The basic configuration of this system includes 8 terminations.The base part number is 3306, so you can find its logic switch related parts using that number.The multiplexer is supplied with 3.3V voltage.At the end of a conductor, it uses GULL WING as the point where the conductor ends.Single is employed as its supply type.The board is configured with 8 pins.Surface Mount is the way it is mounted.The logic switch is a member of the family of 3VT.Signal multiplexer contains 2 bits.It is advisable to keep the maximum supply voltage (Vsup) at 3.63V in order to prevent some unnecessary failures.Without any external influences, it consumes 3μA current of multiplexer ic at all times.A resistance of 2 governs its operation.A resistance of 25Ohm is used to operate the signal switching.In mux switch configuration, there are 2 elements.
PI3VT3306UEX Features
Supplied in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
Adopting a supply type of Single
PI3VT3306UEX Applications
There are a lot of Diodes Incorporated PI3VT3306UEX Signal Switches / Multiplexers / Decoders applications.
- Speed control of medern motors
- Analog to digital conversion
- Logic gates for other digital devices
- Night vision cameras
- Memory chips
- Microprocessor instruction decoding
- Logic circuits
- High-performance memory systems
- HDMI applications
- Code conversion
