PI4ULS3V08MZLE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| Series | ULS |
| JESD-609 Code | e4 |
| Feature | Auto-Direction Sensing |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 4ULS3V08 |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.2V |
| Load Capacitance | 10pF |
| Number of Ports | 2 |
| Nominal Supply Current | 10μA |
| Number of Bits | 8 |
| Propagation Delay | 7 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 4 ns |
| Logic Function | Level Shifter, Transceiver, Translator |
| Data Rate | 90Mbps |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -12mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 12mA |
| Control Type | COMMON CONTROL |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.2V~3.6V |
| Voltage - VCCB | 1.2V~3.6V |
| Channels per Circuit | 4 |
| Length | 6mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PI4ULS3V08MZLE Overview
Embedded in the 32-WFQFN Exposed Pad package, it is now available to you.Level translators is packaged in the way of Tube.Tri-State, Non-Inverted is the output configured for it.Voltage Level is the translator type of this electrical device.Surface Mount is the way in which this electronic part is mounted.In this electrical device, the Channel type is Bidirectional.Level translators is -40°C~85°C TA at the operating temperature.The circuit's superior flexibility is achieved through the use of 2 circuits.To end a transmission line, there are 32 types of termination that can be used.According to the base part number 4ULS3V08, its related parts can be founded.A supply voltage of 1.5V is used to power the device.The device is part of the ULS series.With 32 pins, it is designed.There are 8 bits in this electronic part.Level translators supports the maximal supply voltage of 3.6V.A minimal voltage of 1.2V is needed to operate it.There is a configuration of 1.2V~3.6V for the VCCA supply rail.A VCCB supply rail is configured as 1.2V~3.6V.Mounting this electronic component is done using the Surface Mount method.This part is included in Bus Driver/Transceivers.Level translators uses a logic IC of type BUS TRANSCEIVER.2 terminations are possible, which each match the transmission line's characteristic impedance.Level translators consumes 10μA quiescent current and is not affected by external factors.During operation, Auto-Direction Sensing can be ensured.
PI4ULS3V08MZLE Features
32-WFQFN Exposed Pad package
2 circuits
ULS series
32 pins
PI4ULS3V08MZLE Applications
There are a lot of Diodes Incorporated PI4ULS3V08MZLE voltage translators & level shifters applications.
- Personal computers
- I2C
- Smartphone
- Debouncing a Mechanical Switch
- Controlled Baseline
- Industrial equipment
- Temperature Ranges (1)
- Servers
- General purpose I/O level shifting
- Tablet
