PI5A100QE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2016 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 10Ohm |
| Additional Feature | CAN ALSO OPERATE WITH 5V SUPPLY |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 650mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PI5A100 |
| Number of Outputs | 8 |
| Power Supplies | 3.3/5V |
| Number of Channels | 4 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 1μA |
| Power Dissipation | 650mW |
| Max Supply Current | 1μA |
| Turn On Delay Time | 25 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 12 ns |
| -3db Bandwidth | 230MHz |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 10μA Typ |
| Channel Capacitance (CS(off), CD(off)) | 8pF 14pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 15ns, 7ns |
| Charge Injection | 10pC (Max) |
| Channel-to-Channel Matching (ΔRon) | 800m Ω |
| Crosstalk | -100dB @ 10MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2V~6V |
| Height Seated (Max) | 1.75mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PI5A100QE Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-SSOP (0.154, 3.90mm Width). High reliability is provided by advanced packaging method Tube. Surface Mount is where this multiplexer is located. 2:1 is the ratio of multiplexer to demultiplexer circuits. Around -40°C~85°C TA is the extended operating temperature. Total terminations are 16. A electrical component with 4 channels is capable of high-quality output. Powered by a 3.3V voltage supply, the electrical part should be switched on and run. The analog switch ics are built using SPDT switching circuits. Try searching with PI5A100 if you're looking for variants. An switch multiplexer with 10Ohm internal resistance has a value of 10Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. In normalcircumstances, users should not exceed 6V volts for the multiplexer. Digital switch that provides Single power at a cost-effective price. 2V is the lowest voltage that should be fed to the electronic electronic part. An operating current of 1μA would be sufficient for this switch device. An analogue multiplexer drains from a single voltage supply at 2V~6V. A digital multiplexer may suffer damage if voltage is applied above 1μA. Additional features include: CAN ALSO OPERATE WITH 5V SUPPLY. The analog switch ics includes 8 outputs.
PI5A100QE Features
4 Channels
Switch Circuit: SPDT
1μA Supply Current
-3db Bandwidth: 230MHz
Additional Features: CAN ALSO OPERATE WITH 5V SUPPLY
PI5A100QE Applications
There are a lot of Diodes Incorporated PI5A100QE Analog Switches & Multiplexers ICs applications.
- Precision test equipment
- Avionics
- PCMCIA cards
- Wireless Local Loop
- Residential Gateways, Home Gateway/Router
- HDTV
- Public switching systems
- Voice over IP/DSL – Integrated Access Devices, Smart
- PDH Multiplexers
- ISDN NT1/TA
