PI5A100QEX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 10Ohm |
| Additional Feature | CAN ALSO OPERATE WITH 5V SUPPLY |
| Max Power Dissipation | 650mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PI5A100 |
| Number of Outputs | 8 |
| Polarity | Non-Inverting |
| Number of Channels | 4 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Nominal Supply Current | 1μA |
| Power Dissipation | 650mW |
| Max Supply Current | 1μA |
| Quiescent Current | 10μA |
| Turn On Delay Time | 25 ns |
| Logic Function | Level Shifter |
| Number of Inputs | 4 |
| Supply Type | Single |
| Turn-Off Delay Time | 12 ns |
| -3db Bandwidth | 230MHz |
| On-State Resistance (Max) | 10Ohm |
| High Level Output Current | 100mA |
| Low Level Output Current | 12mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 10μA Typ |
| Channel Capacitance (CS(off), CD(off)) | 8pF 14pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 15ns, 7ns |
| Charge Injection | 10pC (Max) |
| Channel-to-Channel Matching (ΔRon) | 800m Ω |
| Crosstalk | -100dB @ 10MHz |
| Voltage - Supply, Single (V+) | 2V~6V |
| Height Seated (Max) | 1.75mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PI5A100QEX Overview
Shipping overseas is convenient with the electronic component packed in 16-SSOP (0.154, 3.90mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Surface Mount position. 2:1 is the number of circuits in the multiplexer and demultiplexer. The operating temperature is extended to around -40°C~85°C TA. A total of 16 terminations have been recorded. By its 4 channels, the electronic component provides high-quality output. In the case of a voltage supply of 3.3V volts, the electrical part can be powered up and run. A SPDT switching circuit is used for these analog switches. Using the PI5A100 search parameter, you can discover variants of the switch. It has an internal resistance of 10Ohm. You can find the functions of the 16 pins in the datasheets. normally, users should not supply switches with voltages higher than 6V. A cost-effective Single supply type analogue multiplexer. It is recommended that the electrical component receives a voltage of 2V. An analogue multiplexer drains from a single voltage supply at 2V~6V. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. The electrical component supports 4 inputs. Additional features of the electronic component include: CAN ALSO OPERATE WITH 5V SUPPLY. An output of 8 is provided by the digital multiplexer.
PI5A100QEX Features
4 Channels
Switch Circuit: SPDT
-3db Bandwidth: 230MHz
Additional Features: CAN ALSO OPERATE WITH 5V SUPPLY
PI5A100QEX Applications
There are a lot of Diodes Incorporated PI5A100QEX Analog Switches & Multiplexers ICs applications.
- Cell phones
- Audio and video signal routing
- Low-Voltage
- Multiplexers
- Industrial
- SDH/SONET multiplexers
- Avionics test equipment
- Digital Cross-Connects
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Audio/video switches
