PI5A100WE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2016 |
| JESD-609 Code | e3 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 10Ohm |
| Additional Feature | CAN ALSO OPERATE WITH 5V SUPPLY |
| Max Power Dissipation | 650mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PI5A100 |
| Number of Outputs | 8 |
| Number of Channels | 4 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 1μA |
| Power Dissipation | 650mW |
| Max Supply Current | 1μA |
| Turn On Delay Time | 25 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 12 ns |
| -3db Bandwidth | 230MHz |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 10μA Typ |
| Channel Capacitance (CS(off), CD(off)) | 8pF 14pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 15ns, 7ns |
| Charge Injection | 10pC (Max) |
| Channel-to-Channel Matching (ΔRon) | 800m Ω |
| Crosstalk | -100dB @ 10MHz |
| Voltage - Supply, Single (V+) | 2V~6V |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PI5A100WE Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tube is used. A switch device like this is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 2:1. Increasing operating temperature to around -40°C~85°C TA. Totally, there are 16 terminations. The electronic part provides high-quality output because it has 4 channels. When the electronic component is given a voltage of 3.3V, it should be turned on and run. A SPDT switching circuit is used for these analog switches. Try searching for the analog switch ic with PI5A100 if you are looking for variants. A 10Ohm internal resistance characterizes this multiplexer. For functions related to 16 pins, please refer to the datasheets. Users shouldn't supply more than 6V voltage to the switch device. The digital multiplexer has a low cost Single supply. The lowest voltage fed to the electronic component should be 2V. For this digital switch to work, 1μA current would suffice. Using only a single voltage supply, this analog switch requires 2V~6V voltage. A digital multiplexer may suffer damage if voltage is applied above 1μA. This electrical component also includes additional features such as CAN ALSO OPERATE WITH 5V SUPPLY. The analogue multiplexer has 8 outputs.
PI5A100WE Features
4 Channels
Switch Circuit: SPDT
1μA Supply Current
-3db Bandwidth: 230MHz
Additional Features: CAN ALSO OPERATE WITH 5V SUPPLY
PI5A100WE Applications
There are a lot of Diodes Incorporated PI5A100WE Analog Switches & Multiplexers ICs applications.
- Audio and video switching
- Audio and video routing
- Ultrasound
- Cable PC
- Medical systems
- Cable Modem
- PCMCIA cards
- High-Voltage
- Medical
- Private Branch Exchange (PBX)
