Parameters |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2010 |
JESD-609 Code |
e3 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
48 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
10Ohm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
16861 |
Operating Supply Voltage |
5V |
Circuit |
10 x 1:1 |
Power Supplies |
5V |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Number of Bits |
20 |
Throw Configuration |
SPST |
Propagation Delay |
1.25 ns |
Quiescent Current |
10μA |
Turn On Delay Time |
6.5 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Output Polarity |
TRUE |
High Level Output Current |
-120mA |
Low Level Output Current |
120mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
2 |
Width |
6.1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
48-TFSOP (0.240, 6.10mm Width) |
Number of Pins |
48 |
PI5C16861AE Overview
As a means of saving space, digital switch is provided in the 48-TFSOP (0.240, 6.10mm Width).It is packaged according to the Tube method.The mounting method digital switch ic uses is Surface Mount.The analog IC in the multiplexers is identified as Bus Switch.The operating temperature of -40°C~85°C will not be susceptible to external factors.There are 48 terminations included in its basic configuration.In addition, it also has a base part number of 16861, which can be used to find related parts.For multiplexer's system, a voltage of 5V is supplied.As a result, conductors end at GULL WING.There is a type of supply Single that is employed in this case.The board has 48 pins configured.The mounting point is Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.Signal multiplexer consists of 20 bits.During mux switch's normal operation, 5V is provided with a power supply.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.Without any external influences, it consumes 10μA current of multiplexer ic at all times.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.The signal switching operates with a resistance of 2.With a resistance of 10Ohm, it operates.The signal switches is specified to operate at the maximum supply voltage of 5.5V in compliance with the applicable device specification.Device specifications require that the minimum supply voltage is 4.5V.
PI5C16861AE Features
Supplied in the 48-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
PI5C16861AE Applications
There are a lot of Diodes Incorporated PI5C16861AE Signal Switches / Multiplexers / Decoders applications.
- CPU memory location identification
- VGA
- GLAN
- Injectors
- Data transfer
- Used to connect a single source to multiple destinations
- Solenoid cooling fan
- Data demultiplexing
- Enabling block of memory depending on address in memory chips
- Steel plants