PI5C3125QE
| Parameters | |
|---|---|
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Circuit | 1 x 1:1 |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Power Dissipation | 500mW |
| Number of Bits | 4 |
| Throw Configuration | SPST |
| Propagation Delay | 5.4 ns |
| Quiescent Current | 3μA |
| Turn On Delay Time | 5.4 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 1.75mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 22Ohm |
| Terminal Finish | MATTE TIN (787) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 3125 |
PI5C3125QE Overview
Digital switch is provided in the 16-SSOP (0.154, 3.90mm Width) for the purpose of saving board space.It is packaged according to the Tube method.Digital switch ic adheres to a mounting method of Surface Mount.A digital IC Bus Switch is used as the analog component of the multiplexers.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility when digital controlled switch operates at a 4.5V~5.5V supply voltage.Its basic configuration includes terminations in the 16 range.You can also find related parts by using its logic switch base part number of 3125.The multiplexer is supplied with 5V voltage.It is the end of conductors that is represented by GULL WING.There is a type of supply of Single.Currently, it is configured with a 16 pin configuration.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.As a result, signal multiplexer provides a total of 4 bits.There is a power supply provided for the mux switch's normal operation of 5V.Bus Driver/Transceivers is a category for the digital switch ics.Without external influences, it consumes 3μA current of multiplexer ic.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.A resistance of 2 is used to operate the signal switching.With a resistance of 22Ohm, it operates.A configuration element for the mux switch consists of 4 elements.
PI5C3125QE Features
Supplied in the 16-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
PI5C3125QE Applications
There are a lot of Diodes Incorporated PI5C3125QE Signal Switches / Multiplexers / Decoders applications.
- Arithmetic Logic Units
- Make full adder
- Code converters
- Enabling different rows of memory depending on address in memory chips
- CPU memory location identification
- To select different devices in microprocessor input
- D/A converters
- Small scale TV wall
- Communication system
- Control unit of Central Processing unit (CPU)
