PI5C3245LEX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 10Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PI5C3245 |
| Operating Supply Voltage | 5V |
| Circuit | 8 x 1:1 |
| Power Supplies | 5V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6.5 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PI5C3245LEX Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 20-TSSOP (0.173, 4.40mm Width).It is packaged in the way of Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.Bus Switch is the analog IC that the multiplexers uses.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.Designers have greater flexibility using digital controlled switch when it works with 4.75V~5.25V voltage.There is a design for terminating 20 as part of its basic configuration.There is a base part number PI5C3245 that can be used to locate signal switch's related components as well.The voltage supplied for multiplexer's system is 5V.multiplexer's systemAs a result, conductors end at GULL WING.In this case, the supply type is Single.Currently, it is configured with 20 pins.Surface Mount is the way it is mounted.The logic switch is a member of the family of CBT/FST/QS/5C/B.In this signal multiplexer, there are 8 bits provided.The power supply of 5V is provided for mux switch's normal operation.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.Without external influences, it consumes 3μA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.The signal switching operates with a resistance of 2.With a resistance of 10Ohm, it operates.
PI5C3245LEX Features
Supplied in the 20-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
PI5C3245LEX Applications
There are a lot of Diodes Incorporated PI5C3245LEX Signal Switches / Multiplexers / Decoders applications.
- Medium scale TV wall
- GLAN
- RF-based home automation system
- Seven segment displays
- Analog, digital or video signal switching
- Signal router
- Robotic vehicles
- Paper plants
- Code converters
- A/D converters
