banner_page

PI5C3253WE

16 Terminations4.75V~5.25V Signal switch2 Functions


  • Manufacturer: Diodes Incorporated
  • Nocochips NO: 233-PI5C3253WE
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 933
  • Description: 16 Terminations4.75V~5.25V Signal switch2 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Operating Temperature -40°C~85°C
Packaging Tube
Published 2009
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Type Multiplexer/Demultiplexer
Terminal Finish MATTE TIN
Subcategory Other Logic ICs
Technology CMOS
Voltage - Supply 4.75V~5.25V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Time@Peak Reflow Temperature-Max (s) 40
Qualification Status Not Qualified
Circuit 2 x 4:1
Power Supplies 5V
Supply Voltage-Min (Vsup) 4.75V
Load Capacitance 50pF
Number of Ports 2
Number of Bits 4
Propagation Delay 250 ps
Family CBT/FST/QS/5C/B
Output Characteristics 3-STATE
Output Polarity TRUE
High Level Output Current -120mA
Low Level Output Current 120mA
Number of Input Lines 8
Voltage Supply Source Single Supply
Independent Circuits 1
Number of Output Lines 2
Length 9.9mm
RoHS Status ROHS3 Compliant

PI5C3253WE Overview


Due to the fact that it is provided in the 16-SOIC (0.154, 3.90mm Width), digital switch allows the board to be compacted.It is packaged according to the Tube method.For mounting, digital switch ic uses the method Surface Mount.The analog IC in the multiplexers is identified as Multiplexer/Demultiplexer.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 4.75V~5.25V supply voltage.The basic configuration of this system includes 16 terminations.In multiplexer's system, 5V is the voltage supplied.It employs GULL WING as the point at which conductors come to an end.The logic switch is a member of the CBT/FST/QS/5C/B family.Signal multiplexer provides 4 bits.The minimal supply voltage (Vsup) should be kept at 4.75V to avoid some unnecessary failures.For mux switch's normal operation, power supply 5V is provided.The digital switch ic is a part of an electronic system classified as Other Logic ICs.The system operates with a resistance of 2.On the multiplexers, 8 input lines are provided for accepting voltage levels.In this case, the signal source has a total of 2 output lines.

PI5C3253WE Features


Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Power supplies of 5V
8 input lines
2 output lines

PI5C3253WE Applications


There are a lot of Diodes Incorporated PI5C3253WE Signal Switches / Multiplexers / Decoders applications.

  • LVDS
  • Automatic Monitoring systems
  • Home automation system
  • Speed control of medern motors
  • Make half adder
  • RF-based home automation system
  • Code converters
  • Injectors
  • HD surveillance system
  • Encrypted communications system

Write a review

Note: HTML is not translated!
    Bad           Good