PI5C3305LE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 8Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 3305 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Power Dissipation | 500mW |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 5.5 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Length | 4.4mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PI5C3305LE Overview
It is included in the 8-TSSOP (0.173, 4.40mm Width) in order to save board space.It is packaged in the way of Tube.The mounting method digital switch ic uses is Surface Mount.For the analog part of the multiplexers, an IC Bus Switch is used.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.Design engineers have more flexibility when digital controlled switch operates at 4V~5.5V voltage.This configuration includes 8 terminations as part of its basic functionality.In addition, it also has a base part number of 3305, which can be used to find related parts.The multiplexer's system is supplied with a voltage of 5V.As a result, conductors end at GULL WING.Single is employed as its supply type.There are 8 pins on it.The mount is in Surface Mount.I would like to refer to the logic switch as a member of the CBT/FST/QS/5C/B family.In this signal multiplexer, there are 1 bits that are provided.It is recommended that the minimum supply voltage (Vsup) be kept at 4V so that unnecessary failures can be prevented.Normally, 5V is powered by a battery.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.It consumes 3μA current of multiplexer ic without external influences.Using a supply voltage of 5V can result in reliable performance of the multiplexers.2 is the resistance at which it operates.The resistance of the signal switching is 8Ohm.The mux switch configuration contains 2 elements.
PI5C3305LE Features
Supplied in the 8-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
PI5C3305LE Applications
There are a lot of Diodes Incorporated PI5C3305LE Signal Switches / Multiplexers / Decoders applications.
- Data bus control
- Memory chips
- Microprocessor input/output systems
- Data-routing applications
- Telephone network
- Automation system
- Encrypted communications system
- Seven segment displays
- Make full adder
- LVDS
