PI5C3305LEX
| Parameters | |
|---|---|
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Length | 4.4mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 8Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PI5C3305 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 250 ps |
| Quiescent Current | 100nA |
| Turn On Delay Time | 5.5 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
PI5C3305LEX Overview
For the purpose of saving board space, digital switch is included in the 8-TSSOP (0.173, 4.40mm Width).The package is packaged in the manner of Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .In the multiplexers, the analog IC Bus Switch is used.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.A supply voltage of 4V~5.5V provides digital controlled switch's superior flexibility for designers.As part of its basic configuration, 8 terminations are designed as a part of it.The base part number is PI5C3305, so you can find its logic switch related parts using that number.For multiplexer's system, a voltage of 5V is supplied.As a result, conductors end at GULL WING.Its supply type is Single, which is used as the source of power.It is configured with 8 pins.The mount is in Surface Mount.The logic switch is a member of the family of CBT/FST/QS/5C/B.In the signal multiplexer, there are 1 bits available.Keeping Vsup at 4V will prevent some unwanted failures.mux switch's normal operation requires the power supply of 5V.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.In the absence of external influences, it consumes 100nA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5V.2 ports are used for some other peripheral signal switchings to plug in.A resistance of 8Ohm is used to operate the signal switching.A configuration element for the mux switch consists of 2 elements.
PI5C3305LEX Features
Supplied in the 8-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
PI5C3305LEX Applications
There are a lot of Diodes Incorporated PI5C3305LEX Signal Switches / Multiplexers / Decoders applications.
- Data-routing applications
- A robotic vehicle with the metal detector
- Enabling different functions units in microprocessor instruction decoding
- Used to connect a single source to multiple destinations
- Paper plants
- Make full adder
- Combinational circuit
- Speed synchronization of multiple motors in industries
- Steel plants
- Time division multiplexing system
